RK3588S EVB1 board features:
- Rockchip RK3588S
- PMIC: RK806-2x2pcs+DiscretePower
- RAM: LPDDR4/4x 2pcsx 32bit
- ROM: eMMC5.1+ SPI Falsh
Damon Ding (2):
dt-bindings: arm: rockchip: Add RK3588S EVB1 board
arm64: dts: rockchip: Add RK3588S EVB1 board
Changes in v2:
- rename amplifier nodes to amplifier-headphone and amplifier-speaker
- sort audio and backlight nodes by node name
- format names of regulator nodes to regulator-*
- add CPU/memory regulator coupling
- fix "VOP-" to "VOL-" in commit message
- remove bootargs property in chosen node
Changes in v3:
- remove unevaluated properties:
pcie@fe190000: 'rockchip,skip-scan-in-resume'
pmic@1: regulators: dcdc-reg*: 'regulator-init-microvolt'
phy@fed80000: 'svid'
Changes in v4:
- remove unexpected property bootargs which added by mistake in v3
- add cd-gpios property in sdmmc node
- enable combphy2_psu for pcie2x1l1
- improve commit messages
- add proper series title
Changes in v5:
- fix the simple-audio-card,hp-det-gpio to gpio1_d0 in analog-sound node
- replace gpio property with gpios in regulator nodes
- move status property after pinctrl-0 in i2c8 node
- remove status property in usbc0 node
- fix interrupts pin to gpio0_c4 in hym8563 node
- sort properties alphabetically in sdmmc node
- use RK_PA7 instead of 7 in pmic nodes
- move pinctrl-name after pinctrl-0 in pmic@1 node
- add pinctrl-name in uart2 node
- remove dr_mode property in usb_host0_xhci node
.../devicetree/bindings/arm/rockchip.yaml | 5 +
arch/arm64/boot/dts/rockchip/Makefile | 1 +
.../boot/dts/rockchip/rk3588s-evb1-v10.dts | 1128 +++++++++++++++++
3 files changed, 1134 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
--
2.34.1
