On 10:56-20240913, Garrett Giordano wrote:
> The am625 is capable of running at 1.4 GHz when VDD_CORE is increased
> from 0.75V to 0.85V. Here we add a 1.4 GHz node to the a53_opp_table and
> increase the VDD_CORE voltage accordingly.
The entire argument in introducing the 1.4Ghz overlay seems to have been
to let users have the choice. What has changed since then?
Ref: commit 7a5775a3da906dab059b8de60a2b88f6016cb4b8
btw, instead of putting a patch to delete the dtso, you should
probably consider a revert patch instead.
>
> Signed-off-by: Garrett Giordano <ggiordano@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> index ac8959f3d953..8acbd4facf37 100644
> --- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
> @@ -205,6 +205,13 @@ AM62X_IOPAD(0x01f4, PIN_INPUT, 0) /* (D16) EXTINTn */
> };
> };
>
> +&a53_opp_table {
> + opp-1400000000 {
> + opp-hz = /bits/ 64 <1400000000>;
> + opp-supported-hw = <0x01 0x0004>;
> + };
> +};
> +
> &mcu_m4fss {
> mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
> memory-region = <&mcu_m4fss_dma_memory_region>,
> @@ -265,8 +272,8 @@ pmic@30 {
> regulators {
> vdd_core: buck1 {
> regulator-name = "VDD_CORE";
> - regulator-min-microvolt = <750000>;
> - regulator-max-microvolt = <750000>;
> + regulator-min-microvolt = <850000>;
> + regulator-max-microvolt = <850000>;
> regulator-boot-on;
> regulator-always-on;
> };
> --
> 2.25.1
>
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
