[PATCH v4 1/2] dt-bindings: i2c: pca954x: Add timeout reset property

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Wojciech Siudy <wojciech.siudy@xxxxxxxxx>

For cases when the mux shares reset line with other chips we cannot
use it when channel selection or deselection times out, because it
could break them without proper init/probe.

Signed-off-by: Wojciech Siudy <wojciech.siudy@xxxxxxxxx>
---
 .../devicetree/bindings/i2c/i2c-mux-pca954x.yaml          | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
index 9aa0585200c9..872be72da965 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml
@@ -63,6 +63,12 @@ properties:
       necessary for example, if there are several multiplexers on the bus and
       the devices behind them use same I2C addresses.
 
+  i2c-mux-timeout-reset:
+    type: boolean
+    description: Sends reset pulse if channel selection or deselection times
+      out. Works only if reset GPIO provided. Do not use if other chips share
+      the same reset line.
+
   idle-state:
     description: if present, overrides i2c-mux-idle-disconnect
     $ref: /schemas/mux/mux-controller.yaml#/properties/idle-state
@@ -146,6 +152,8 @@ examples:
             interrupt-parent = <&ipic>;
             interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
             interrupt-controller;
+            i2c-mux-idle-disconnect;
+            i2c-mux-timeout-reset;
             #interrupt-cells = <2>;
 
             i2c@2 {
-- 
2.34.1






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux