Am 2015-03-18 um 17:21 schrieb Alexander Stein: > On Wednesday 18 March 2015 16:55:57, Martin Kepplinger wrote: >> From: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxxxxxxxxxx> >> >> The MMA8653FC is a low-power, three-axis, capacitive micromachined >> accelerometer with 10 bits of resolution with flexible user-programmable >> options. >> >> Embedded interrupt functions enable overall power savings, by relieving the >> host processor from continuously polling data, for example using the poll() >> system call. >> >> The device can be configured to generate wake-up interrupt signals from any >> combination of the configurable embedded functions, enabling the MMA8653FC >> to monitor events while remaining in a low-power mode during periods of >> inactivity. >> >> This driver provides devicetree properties to program the device's behaviour >> and a simple, tested and documented sysfs interface. The data sheet and more >> information is available on Freescale's website. >> >> Signed-off-by: Martin Kepplinger <martin.kepplinger@xxxxxxxxxxxxxxxxxxxxx> >> Signed-off-by: Christoph Muellner <christoph.muellner@xxxxxxxxxxxxxxxxxxxxx> >> --- >> applies to v4.0-rc4 and the current -next. >> >> patch revision history >> ...................... >> v2 corrects licensing and commit messages and adds appropriate recipients >> >> .../testing/sysfs-bus-i2c-devices-fsl-mma8653fc | 39 + >> .../devicetree/bindings/misc/fsl,mma8653fc.txt | 96 +++ >> MAINTAINERS | 5 + >> drivers/input/misc/Kconfig | 11 + >> drivers/input/misc/Makefile | 1 + >> drivers/input/misc/mma8653fc.c | 913 +++++++++++++++++++++ >> 6 files changed, 1065 insertions(+) >> create mode 100644 Documentation/ABI/testing/sysfs-bus-i2c-devices-fsl-mma8653fc >> create mode 100644 Documentation/devicetree/bindings/misc/fsl,mma8653fc.txt >> create mode 100644 drivers/input/misc/mma8653fc.c > > Shouldn't this go to drivers/iio/magnetometer instead of defining a new sysfs ABI? > It could have gone to drivers/iio/accel if it would use an iio interface, which would make more sense, you are right, but I simply don't have the time to merge it in to iio. It doesn't use an input interface either but I don't see a good place for an accelerometer that uses sysfs only. It works well, is a relatively recent chip and a clean dirver. But this is all I can provide. > Best regards, > Alexander > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
