Re: [PATCH 3/3] mailbox: Add support for ST's Mailbox IP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, 18 Mar 2015, Jassi Brar wrote:
> On Wed, Mar 18, 2015 at 6:42 PM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> > On Wed, 04 Mar 2015, Jassi Brar wrote:
> >
> >> > +
> >> > +       if ((!data) || (!sti_mbox_chan_is_tx(mbox)))
> >> >
> >> nit: too much protection.
> >
> > What makes you think that?
> >
>  Usually we write
>                if (!data || !sti_mbox_chan_is_tx(mbox))

Ah, the parentheses.  Yes, I agree.  Thanks for clarifying.

> >> > +                       mbox->irq = irq_create_mapping(mbinst->irq_domain,
> >> > +                                                      mbox->rx_id);
> >> >
> >> simply assigning same IRQ to all controller DT nodes and using
> >> IRQF_SHARED for the common handler, wouldn't work?
> >
> > I do have intentions to simplify this driver somewhat, but that will
> > take some time as it will require a great deal of consultation and
> > testing from the ST side.  This is the current internal implementation
> > which is used in the wild and has been fully tested.  If you'll allow
> > me to conduct my adaptions subsequently we can have full history and a
> > possible reversion plan if anything untoward take place i.e. I mess
> > something up.
> >
> OK, but wouldn't that break the bindings of this driver when you
> eventually do that?

That's going to happen regardless, since these bindings are already in
use internally.  Mainline (i.e. v4.0+) isn't going to be used in
products for years to come, so we have a lot of time until any new
bindings become ABI.

> >> > + * struct sti_mbox_msg - sti mailbox message description
> >> > + * @dsize:             data payload size
> >> > + * @pdata:             message data payload
> >> > + */
> >> > +struct sti_mbox_msg {
> >> > +       u32             dsize;
> >> > +       u8              *pdata;
> >> > +};
> >> >
> >> There isn't any client driver in this patchset to tell exactly, but it
> >> seems the header could be split into one shared between mailbox
> >> clients and provider and another internal to client/provider ?
> >
> > I believe only the above will be required by the client.  Seems silly
> > to create a client specific header just for that, don't you think?
> >
> Do you mean to have copies of the structure in controller and client driver? :O

I do not.  I planned on sharing the main header with with client
also.

But I guess by your reaction you suggest having a teeny client header
as the best way forward then.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux