[PATCH] ASoC: dt-bindings: realtek,rt5640: Convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the RT5640/RT5639 audio CODEC bindings to DT schema.

Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
---
 .../devicetree/bindings/sound/realtek,rt5640.yaml  | 146 +++++++++++++++++++++
 Documentation/devicetree/bindings/sound/rt5640.txt |  97 --------------
 2 files changed, 146 insertions(+), 97 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml b/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml
new file mode 100644
index 000000000000..3f4f59287c1c
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/realtek,rt5640.yaml
@@ -0,0 +1,146 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/realtek,rt5640.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RT5640/RT5639 audio CODEC
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@xxxxxxxxxx>
+
+description: |
+  This device supports I2C only.
+
+  Pins on the device (for linking into audio routes) for RT5639/RT5640:
+    * DMIC1
+    * DMIC2
+    * MICBIAS1
+    * IN1P
+    * IN1N
+    * IN2P
+    * IN2N
+    * IN3P
+    * IN3N
+    * HPOL
+    * HPOR
+    * LOUTL
+    * LOUTR
+    * SPOLP
+    * SPOLN
+    * SPORP
+    * SPORN
+
+  Additional pins on the device for RT5640:
+    * MONOP
+    * MONON
+
+allOf:
+  - $ref: dai-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - realtek,rt5640
+      - realtek,rt5639
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+    description: The CODEC's interrupt output.
+
+  realtek,in1-differential:
+    description:
+      Indicate MIC1 input is differential, rather than single-ended.
+    type: boolean
+
+  realtek,in2-differential:
+    description:
+      Indicate MIC2 input is differential, rather than single-ended.
+    type: boolean
+
+  realtek,in3-differential:
+    description:
+      Indicate MIC3 input is differential, rather than single-ended.
+    type: boolean
+
+  realtek,lout-differential:
+    description:
+      Indicate LOUT output is differential, rather than single-ended.
+    type: boolean
+
+  realtek,dmic1-data-pin:
+    description: Specify which pin to be used as DMIC1 data pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic1 is not used
+      - 1 # using IN2P pin as dmic1 data pin
+      - 2 # using GPIO3 pin as dmic1 data pin
+
+  realtek,dmic2-data-pin:
+    description: Specify which pin to be used as DMIC2 data pin.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # dmic2 is not used
+      - 1 # using IN2N pin as dmic2 data pin
+      - 2 # using GPIO4 pin as dmic2 data pin
+
+  realtek,jack-detect-source:
+    description: The Jack Detect source.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # Jack Detect function is not used
+      - 1 # Use GPIO1 for jack-detect
+      - 2 # Use JD1_IN4P for jack-detect
+      - 3 # Use JD2_IN4N for jack-detect
+      - 4 # Use GPIO2 for jack-detect
+      - 5 # Use GPIO3 for jack-detect
+      - 6 # Use GPIO4 for jack-detect
+
+  realtek,jack-detect-not-inverted:
+    description:
+      Normal jack-detect switches give an inverted signal, set this bool
+      in the rare case you've a jack-detect switch which is not inverted.
+    type: boolean
+
+  realtek,over-current-threshold-microamp:
+    description: micbias over-current detection threshold in µA
+    enum:
+      - 600
+      - 1500
+      - 2000
+
+  realtek,over-current-scale-factor:
+    description: micbias over-current detection scale-factor
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum:
+      - 0 # Scale current by 0.5
+      - 1 # Scale current by 0.75
+      - 2 # Scale current by 1.0
+      - 3 # Scale current by 1.5
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        codec@1a {
+            compatible = "realtek,rt5640";
+            reg = <0x1a>;
+            interrupt-parent = <&gpio>;
+            interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/sound/rt5640.txt b/Documentation/devicetree/bindings/sound/rt5640.txt
deleted file mode 100644
index 0c398581d52b..000000000000
--- a/Documentation/devicetree/bindings/sound/rt5640.txt
+++ /dev/null
@@ -1,97 +0,0 @@
-RT5640/RT5639 audio CODEC
-
-This device supports I2C only.
-
-Required properties:
-
-- compatible : One of "realtek,rt5640" or "realtek,rt5639".
-
-- reg : The I2C address of the device.
-
-- interrupts : The CODEC's interrupt output.
-
-Optional properties:
-
-- clocks: The phandle of the master clock to the CODEC
-- clock-names: Should be "mclk"
-
-- realtek,in1-differential
-- realtek,in2-differential
-- realtek,in3-differential
-  Boolean. Indicate MIC1/2/3 input are differential, rather than single-ended.
-
-- realtek,lout-differential
-  Boolean. Indicate LOUT output is differential, rather than stereo.
-
-- realtek,ldo1-en-gpios : The GPIO that controls the CODEC's LDO1_EN pin.
-
-- realtek,dmic1-data-pin
-  0: dmic1 is not used
-  1: using IN1P pin as dmic1 data pin
-  2: using GPIO3 pin as dmic1 data pin
-
-- realtek,dmic2-data-pin
-  0: dmic2 is not used
-  1: using IN1N pin as dmic2 data pin
-  2: using GPIO4 pin as dmic2 data pin
-
-- realtek,jack-detect-source
-  u32. Valid values:
-  0: jack-detect is not used
-  1: Use GPIO1 for jack-detect
-  2: Use JD1_IN4P for jack-detect
-  3: Use JD2_IN4N for jack-detect
-  4: Use GPIO2 for jack-detect
-  5: Use GPIO3 for jack-detect
-  6: Use GPIO4 for jack-detect
-
-- realtek,jack-detect-not-inverted
-  bool. Normal jack-detect switches give an inverted signal, set this bool
-  in the rare case you've a jack-detect switch which is not inverted.
-
-- realtek,over-current-threshold-microamp
-  u32, micbias over-current detection threshold in µA, valid values are
-  600, 1500 and 2000µA.
-
-- realtek,over-current-scale-factor
-  u32, micbias over-current detection scale-factor, valid values are:
-  0: Scale current by 0.5
-  1: Scale current by 0.75
-  2: Scale current by 1.0
-  3: Scale current by 1.5
-
-Pins on the device (for linking into audio routes) for RT5639/RT5640:
-
-  * DMIC1
-  * DMIC2
-  * MICBIAS1
-  * IN1P
-  * IN1N
-  * IN2P
-  * IN2N
-  * IN3P
-  * IN3N
-  * HPOL
-  * HPOR
-  * LOUTL
-  * LOUTR
-  * SPOLP
-  * SPOLN
-  * SPORP
-  * SPORN
-
-Additional pins on the device for RT5640:
-
-  * MONOP
-  * MONON
-
-Example:
-
-rt5640 {
-	compatible = "realtek,rt5640";
-	reg = <0x1c>;
-	interrupt-parent = <&gpio>;
-	interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_HIGH>;
-	realtek,ldo1-en-gpios =
-		<&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>;
-};

---
base-commit: 47ac09b91befbb6a235ab620c32af719f8208399
change-id: 20240911-topic-amlogic-arm32-upstream-bindings-fixes-covert-realtek-rt5640-bd6d0e6a05d8

Best regards,
-- 
Neil Armstrong <neil.armstrong@xxxxxxxxxx>





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux