On Mon, Sep 9, 2024 at 11:50 PM Frieder Schrempf
<frieder.schrempf@xxxxxxxxxx> wrote:
>
> Hi Tim,
>
> On 09.09.24 11:53 PM, Tim Harvey wrote:
> > The IMX8MP has a VeriSilicon (Vivante VIP8000) NPU which
> > is supported by the etnaviv driver. Enable it.
> >
> > Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi | 4 ++++
> > arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts | 4 ++++
> > 2 files changed, 8 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
> > index 6c75a5ecf56b..f0211a96855b 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw702x.dtsi
> > @@ -393,6 +393,10 @@ &i2c3 {
> > status = "okay";
> > };
> >
> > +&npu {
> > + status = "okay";
> > +};
> > +
> > /* off-board header */
> > &uart1 {
> > pinctrl-names = "default";
> > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > index 9885948952b4..8a04b66a4afc 100644
> > --- a/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx.dts
> > @@ -666,6 +666,10 @@ &i2c4 {
> > status = "okay";
> > };
> >
> > +&npu {
> > + status = "okay";
> > +};
> > +
> > &pcie_phy {
> > fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
> > fsl,clkreq-unsupported;
>
> I think there is no need for this patch as the NPU is already enabled by
> default in imx8mp.dtsi (same as the GPUs). Or do you disable it in some
> intermediate devicetree include file?
>
Frieder,
Thanks for pointing this out... you are correct. I'm not sure why I
thought it needed to be explicitly enabled.
Please ignore this patch.
Best Regards,
Tim
