Enable the Mali Valhall GPU on Genio 1200 EVK by providing regulator
supply settings and enable the GPU node.
In addition, set the GPU related regulator voltage range:
1. Set the recommended input voltage range of DVDD_GPU to (0.546V-0.787V),
based on Table 5-3 of MT8395 Application Processor Datasheet.
The regulator mt6315_7_vbuck1("Vgpu") connects to the DVDD_GPU input.
2. Set the input voltage of DVDD_SRAM_GPU, supplied by
mt6359_vsram_others_ldo_reg, to 0.75V and set it always on for GPU SRAM.
This patch is tested by enabling CONFIG_DRM_PANFROST and
on Genio 1200 EVK it probed with following dmesg:
```
panfrost 13000000.gpu: clock rate = 700000092
panfrost 13000000.gpu: mali-g57 id 0x9093 major 0x0 minor 0x1 status 0x0
panfrost 13000000.gpu: features: 00000000,000019f7,
issues: 00000001,80000400
panfrost 13000000.gpu: Features: L2:0x07120206 Shader:0x00000000
Tiler:0x00000809 Mem:0x301
MMU:0x00002830 AS:0xff JS:0x7
panfrost 13000000.gpu: shader_present=0x50045 l2_present=0x1
[drm] Initialized panfrost 1.2.0 for 13000000.gpu on minor 0
```
Signed-off-by: Pablo Sun <pablo.sun@xxxxxxxxxxxx>
---
.../boot/dts/mediatek/mt8395-genio-1200-evk.dts | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
index a06610fff8ad..9b7850b0b9b4 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-genio-1200-evk.dts
@@ -194,6 +194,11 @@ eth_phy0: eth-phy0@1 {
};
};
+&gpu {
+ mali-supply = <&mt6315_7_vbuck1>;
+ status = "okay";
+};
+
&i2c0 {
clock-frequency = <400000>;
pinctrl-0 = <&i2c0_pins>;
@@ -407,6 +412,13 @@ &mt6359_vrf12_ldo_reg {
regulator-always-on;
};
+/* for GPU SRAM */
+&mt6359_vsram_others_ldo_reg {
+ regulator-always-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <750000>;
+};
+
&mt6359codec {
mediatek,mic-type-0 = <1>; /* ACC */
mediatek,mic-type-1 = <3>; /* DCC */
@@ -839,8 +851,8 @@ regulators {
mt6315_7_vbuck1: vbuck1 {
regulator-compatible = "vbuck1";
regulator-name = "Vgpu";
- regulator-min-microvolt = <300000>;
- regulator-max-microvolt = <1193750>;
+ regulator-min-microvolt = <546000>;
+ regulator-max-microvolt = <787000>;
regulator-enable-ramp-delay = <256>;
regulator-allowed-modes = <0 1 2>;
};
--
2.45.2
