Add PDM micphone sound card support, configure the pinmux.
This sound card supports recording sound from PDM microphone
and convert the PDM format data to PCM data.
Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
---
.../boot/dts/freescale/imx93-9x9-qsb.dts | 35 +++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index d213a5343803..1340f5462d11 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -122,6 +122,18 @@ simple-audio-card,codec {
};
};
+ sound-micfil {
+ compatible = "fsl,imx-audio-card";
+ model = "micfil-audio";
+ pri-dai-link {
+ link-name = "micfil hifi";
+ format = "i2s";
+ cpu {
+ sound-dai = <&micfil>;
+ };
+ };
+ };
+
sound-wm8962 {
compatible = "fsl,imx-audio-wm8962";
model = "wm8962-audio";
@@ -266,6 +278,12 @@ pcal6524: gpio@22 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcal6524>;
+ mic-can-sel-hog {
+ gpio-hog;
+ gpios = <17 GPIO_ACTIVE_HIGH>;
+ output-low;
+ };
+
exp-sel-hog {
gpio-hog;
gpios = <22 GPIO_ACTIVE_HIGH>;
@@ -355,6 +373,15 @@ &lpuart1 { /* console */
status = "okay";
};
+&micfil {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pdm>;
+ assigned-clocks = <&clk IMX93_CLK_PDM>;
+ assigned-clock-parents = <&clk IMX93_CLK_AUDIO_PLL>;
+ assigned-clock-rates = <49152000>;
+ status = "okay";
+};
+
&mu1 {
status = "okay";
};
@@ -535,6 +562,14 @@ MX93_PAD_SD1_STROBE__USDHC1_STROBE 0x15fe
>;
};
+ pinctrl_pdm: pdmgrp {
+ fsl,pins = <
+ MX93_PAD_PDM_CLK__PDM_CLK 0x31e
+ MX93_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM00 0x31e
+ MX93_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM01 0x31e
+ >;
+ };
+
pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
fsl,pins = <
MX93_PAD_SD2_RESET_B__GPIO3_IO07 0x31e
--
2.34.1
