Add basic pinctrl driver for Sophgo CV1800 series SoCs. This patch series aims to replace the previous patch from Jisheng [1]. Since the pinctrl of cv1800 has nested mux and its pin definination is discrete, it is not suitable to use "pinctrl-single" to cover the pinctrl device. This patch require another patch [2] that provides standard attribute "input-schmitt-microvolt" The v4 version is from [3] Note: As current documentation is not enough to guess the pin configuration of Huashan Pi, only the pinctrl node is added. [1] https://lore.kernel.org/linux-riscv/20231113005702.2467-1-jszhang@xxxxxxxxxx/ [2] https://lore.kernel.org/all/IA1PR20MB495346246245074234D337A6BBAC2@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ [3] https://lore.kernel.org/all/IA1PR20MB4953DC78BB0FE0C57EA94F91BBB32@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx/ Changed from v5: 1. fix dts node address. Changed from v4: 1. remove the alreay applied patch 2. fix 1812h header file problem. Changed from v3: 1. binding: drop unnecessary type 2. binding: use right ref for pin node. 3. binding: remove mixed spaces and tabs. Changed from v2: 1. remove unused export function. 2. drop "drive-strength" and only use "drive-strength-microamp" in the binding. 3. drop unnecessary ref in the binding. 4. drop unnecessary entry for binding example. Changed from v1: 1. replace attribute "sophgo,bus-holder" with standard "bias-bus-hold". 2. replace attribute "input-schmitt" with "input-schmitt-microvolt". 3. add vddio operations support to report pin state. Inochi Amaoto (2): riscv: dts: sophgo: cv1800b: add pinctrl support riscv: dts: sophgo: cv1812h: add pinctrl support .../boot/dts/sophgo/cv1800b-milkv-duo.dts | 49 +++++++++++++++++++ arch/riscv/boot/dts/sophgo/cv1800b.dtsi | 10 ++++ arch/riscv/boot/dts/sophgo/cv1812h.dtsi | 10 ++++ 3 files changed, 69 insertions(+) -- 2.46.0
