On Fri, Sep 06, 2024 at 04:21:01PM GMT, Andrew Halaney wrote: > This series marks tps659413 and its children as bootph-all in order for > the nodes to be accessible during MCU's u-boot SPL. > > This in turn is desired since the tps659413 needs its MCU ESM > state machine setup in order for the watchdog to reset the board. > > This took me a little while to track down, as enabling the ESM, TPS6594, > etc in u-boot would result in the below boot failure: > > U-Boot SPL 2024.10-rc4-00007-g44b12cbcd1b3-dirty (Sep 06 2024 - 14:25:52 -0500) > SYSFW ABI: 3.1 (firmware rev 0x0009 '9.2.4--v09.02.04 (Kool Koala)') > Initialized 4 DRAM controllers > SPL initial stack usage: 13408 bytes > ### ERROR ### Please RESET the board ### > > Which turns out to actually have failed far earlier in spl_early_init(), > due to these nodes not being accessible in u-boot. That's hard to tell > though since console isn't setup until later (and for that reason I > think spl_early_init()'s return value in j784s4_init.c isn't > evaluated since a panic() at that point would leave a user with *no* > information at all). > > I've tested this in conjunction with a u-boot series which I'll link in > a follow-up response on the k3-j784s4-evm. I'd appreciate someone testing > on the k3-am69-sk at a minimum, as it should suffer the same fate if things > aren't setup appropriately. > > Signed-off-by: Andrew Halaney <ahalaney@xxxxxxxxxx> Better late than never... Link: https://lore.kernel.org/u-boot/20240906-j784s4-esm-enable-v1-0-b83b17d5a744@xxxxxxxxxx/ > --- > Andrew Halaney (2): > arm64: dts: ti: k3-j784s4-evm: Mark tps659413 and children as bootph-all > arm64: dts: ti: k3-am69-sk: Mark tps659413 and children as bootph-all > > arch/arm64/boot/dts/ti/k3-am69-sk.dts | 11 +++++++++++ > arch/arm64/boot/dts/ti/k3-j784s4-evm.dts | 11 +++++++++++ > 2 files changed, 22 insertions(+) > --- > base-commit: 9aaeb87ce1e966169a57f53a02ba05b30880ffb8 > change-id: 20240906-j784s4-tps6594-bootph-19d3f00fb98a > > Best regards, > -- > Andrew Halaney <ahalaney@xxxxxxxxxx> >