Re: [PATCH] dt-binding: touchscreen: fix x-plat-ohm missing type definition

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Sep 9, 2024 at 1:36 PM Sayyad Abid <sayyad.abid16@xxxxxxxxx> wrote:
>
> On Mon, Sep 9, 2024 at 1:21 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> >
> > On 09/09/2024 09:48, Sayyad Abid wrote:
> > > On Mon, Sep 9, 2024 at 12:02 PM Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> > >>
> > >> On Sun, Sep 08, 2024 at 08:47:43PM +0530, Sayyad Abid wrote:
> > >>> This patch fixes the issue with x-plat-ohm missing a type definition.
> > >>> The patch adds the fix for this issue by adding value of this property
> > >>
> > >> You repeated twice the same while it is unclear why this is missing.
> > > I must have overlooked it, my bad.
> >
> > Keep discussion public.
> I am away form my desktop and trying to reply with Gmail's client,
> I use mutt otherwise hence the trouble. I hit 'reply' instead of 'reply all'.
> >
> > >>
> > >> Also:
> > >> Please do not use "This commit/patch/change", but imperative mood. See
> > >> longer explanation here:
> > >> https://elixir.bootlin.com/linux/v5.17.1/source/Documentation/process/submitting-patches.rst#L95
> > > Okay, I'll refer to this article for any further patches. Thank you!
> > >>
> > >>
> > >>> should be a 32-bit unsigned integer.
> > >>>
> > >>> Signed-off-by: Sayyad Abid <sayyad.abid16@xxxxxxxxx>
> > >>>
> > >>> ---
> > >>>  .../devicetree/bindings/input/touchscreen/ti,tsc2005.yaml       | 2 ++
> > >>>  1 file changed, 2 insertions(+)
> > >>>
> > >>> diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
> > >>> index 7187c390b2f5..98ff65cf9f9f 100644
> > >>> --- a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
> > >>> +++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
> > >>> @@ -38,6 +38,8 @@ properties:
> > >>>
> > >>>    ti,x-plate-ohms:
> > >>>      description: resistance of the touchscreen's X plates in ohm (defaults to 280)
> > >>
> > >>> +    $ref: /schemas/types.yaml#/definitions/uint32
> > >>
> > >> $ref should not be needed, so what is exactly missing? Provide some
> > >> sort of proof that you are fixing real issue.
> > > I ran dt_bindings_check on the file which resulted in a warning
> > > "x-plate-ohm : missing type definition", to resolve this warning I
> > > looked at the other yaml files in the ti,txc2005.yaml directory
> > > (/Documentation/devicetree/bindings/input/touchscreen/), Where I found
> > > out that one of the TI's touchscreen (ti,am3359) binding used $ref
> > > property for the similar "x-plate-resistance" property.
> > >
> > > Adding the $ref resolved the warnings.
> >
> > You run some older dtschema.
> I'll update this and check again.
So I did a full clean clone of the kernel repo and followed the
dtschema installation
as mentioned in the Linux Kernel Documentation.
Running the dt_binding_check resulted in the same warning.
> >
> > Anyway, each commit must explain why you are doing this. Whatever
> > warning you fix, you should mention it in the commit msg, because that's
> > the answer to "why?" part.
> >
> Yes, will keep this in mind for any further patches.
> > Best regards,
> > Krzysztof
> >
> Thank you for your time and input.
>
> --
> Abid
What else should I try?

Thank You!

-- 
Abid





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux