There are two hardware IP blocks in MT8188 video decoder pipeline:
vdec-lat and vdec-core, which are powered by vdec0 and vdec1 power
domains respectively.
We noticed that vdec-core needs to be powered down before vdec-lat
during suspend to prevent failures. It's unclear if it's an intended
hardware design or due to power isolation glitch. But in any case, we
observed a power-off sequence here, and it can be considered as an
indirect dependency implication between the vdec0 and vdec1 domains.
Given that, update vdec1 as a sub-domain of vdec0 to enforce the
sequence. Also, use more specific clock names for both power domains.
Signed-off-by: Fei Shao <fshao@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/mediatek/mt8188.dtsi | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index dfbc50c878c4..445d30eee2a1 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -1078,20 +1078,22 @@ power-domain@MT8188_POWER_DOMAIN_VPPSYS1 {
#power-domain-cells = <0>;
};
- power-domain@MT8188_POWER_DOMAIN_VDEC1 {
- reg = <MT8188_POWER_DOMAIN_VDEC1>;
- clocks = <&vdecsys CLK_VDEC2_LARB1>;
- clock-names = "ss-vdec";
- mediatek,infracfg = <&infracfg_ao>;
- #power-domain-cells = <0>;
- };
-
power-domain@MT8188_POWER_DOMAIN_VDEC0 {
reg = <MT8188_POWER_DOMAIN_VDEC0>;
clocks = <&vdecsys_soc CLK_VDEC1_SOC_LARB1>;
- clock-names = "ss-vdec";
+ clock-names = "ss-vdec1-soc-l1";
mediatek,infracfg = <&infracfg_ao>;
- #power-domain-cells = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #power-domain-cells = <1>;
+
+ power-domain@MT8188_POWER_DOMAIN_VDEC1 {
+ reg = <MT8188_POWER_DOMAIN_VDEC1>;
+ clocks = <&vdecsys CLK_VDEC2_LARB1>;
+ clock-names = "ss-vdec2-l1";
+ mediatek,infracfg = <&infracfg_ao>;
+ #power-domain-cells = <0>;
+ };
};
cam_vcore: power-domain@MT8188_POWER_DOMAIN_CAM_VCORE {
--
2.46.0.469.g59c65b2a67-goog
