On Mon, Sep 09, 2024 at 03:24:15PM +0800, Keke Li wrote: > c3-isp is used to process raw image. > > Signed-off-by: Keke Li <keke.li@xxxxxxxxxxx> > --- > .../devicetree/bindings/media/amlogic,c3-isp.yaml | 98 ++++++++++++++++++++++ > 1 file changed, 98 insertions(+) > > diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml > new file mode 100644 > index 000000000000..dfa439cdc380 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/amlogic,c3-isp.yaml > @@ -0,0 +1,98 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/media/amlogic,c3-isp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Amlogic C3 Image Signal Processing Unit > + > +maintainers: > + - Keke Li <keke.li@xxxxxxxxxxx> > + > +description: > + Amlogic ISP is the RAW image processing module > + and supports three channels image output. > + > +properties: > + compatible: > + enum: > + - amlogic,c3-isp > + > + reg: > + maxItems: 1 > + > + reg-names: > + items: > + - const: isp > + > + power-domains: > + maxItems: 1 > + > + clocks: > + maxItems: 2 > + > + clock-names: > + items: > + - const: vapb > + - const: isp0 > + > + interrupts: > + maxItems: 1 > + > + ports: > + $ref: /schemas/graph.yaml#/properties/ports > + Only one port? Then use "port" instead of "ports". Best regards, Krzysztof
