This series brings support for the SC8280XP-based Microsoft Surface Pro 9 5G. Signed-off-by: Jérôme de Bretagne <jerome.debretagne@xxxxxxxxx> --- Changes in v2: - Style fixes - Rename the devicetree to sc8280xp-microsoft-arcata.dts - Update the audio nodes to use codec@ instead of wcd9380-rx or -tx - Document which node corresponds to which physical USB Type-C port - Reordering to get property-0 followed by property-names consistently - Add a dedicated Wi-Fi calibration variant - Remove gpio-reserved-ranges in tlmm node as not needed to boot - Add support for Surface Pro 9 5G in surface_aggregator_registry.c - Switch to the upstream "microsoft,surface-sam" binding - Fix uart18 clock from S1 to S2 - Include Acked-by: and Reviewed-by: tags - Link to v1: https://lore.kernel.org/all/20240903224252.6207-1-jerome.debretagne@xxxxxxxxx/ --- Jérôme de Bretagne (5): dt-bindings: arm: qcom: Document Microsoft Surface Pro 9 5G firmware: qcom: scm: Allow QSEECOM on Microsoft Surface Pro 9 5G platform/surface: aggregator_registry: Add Surface Pro 9 5G arm64: dts: qcom: sc8280xp: Add uart18 arm64: dts: qcom: sc8280xp: Add Microsoft Surface Pro 9 5G .../devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/sc8280xp-microsoft-arcata.dts | 1032 +++++++++++++++++ arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 48 + drivers/firmware/qcom/qcom_scm.c | 1 + .../surface/surface_aggregator_registry.c | 17 + 6 files changed, 1100 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts -- 2.45.2
