[PATCH/RFC v2 1/9] media: dt-bindings: media: i2c: Add AR0144 camera sensor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add device tree binding for the onsemi AR0144 CMOS camera sensor. The
binding supports both the monochrome and color sensor versions.

Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
---
Changes since v1:

- Drop clock-names
- Rename vdd_io-supply to vddio supply
- Drop unnecessary |
---
 .../bindings/media/i2c/onnn,ar0144.yaml       | 162 ++++++++++++++++++
 MAINTAINERS                                   |   6 +
 2 files changed, 168 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/i2c/onnn,ar0144.yaml

diff --git a/Documentation/devicetree/bindings/media/i2c/onnn,ar0144.yaml b/Documentation/devicetree/bindings/media/i2c/onnn,ar0144.yaml
new file mode 100644
index 000000000000..50e0908b6473
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/onnn,ar0144.yaml
@@ -0,0 +1,162 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/onnn,ar0144.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ON Semiconductor AR0144 MIPI CSI-2 sensor
+
+maintainers:
+  - Krzysztof Hałasa <khalasa@xxxxxxx>
+
+description: |
+  The AR0144 is a 1/4" 1MP raw CMOS image sensor with MIPI CSI-2 and parallel
+  outputs, and an I2C-compatible control interface.
+
+  The sensor comes in a regular CMOS version (AR0144CS) and an automotive
+  version (AR0144AT). The former is further declined in a colour version
+  (AR0144CSSC) and a monochrome version (AR0144CSSM), while the later exists
+  only in monochrome (AR0144ATSM)
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    enum:
+      - onnn,ar0144c  # Color version
+      - onnn,ar0144m  # Monochrome version
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  vaa-supply:
+    description:
+      Supply for the VAA and VAA_PIX analog power rails (2.8V).
+
+  vdd-supply:
+    description:
+      Supply for the VDD and VDD_PHY digital power rails (1.2V).
+
+  vddio-supply:
+    description:
+      Supply for the VDD_IO digital I/O power rail (1.8V or 2.8V).
+
+  reset-gpios:
+    description: Reset GPIO, active low.
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    unevaluatedProperties: false
+    description:
+      Video output port.
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          bus-type:
+            enum:
+              - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+              - 5 # MEDIA_BUS_TYPE_PARALLEL
+
+          data-lanes:
+            items:
+              - const: 1
+              - const: 2
+
+          bus-width:
+            enum: [8, 10, 12]
+            default: 12
+
+          data-shift:
+            enum: [0, 2, 4]
+            default: 0
+
+          pclk-sample:
+            enum: [0, 1]
+            default: 0
+
+        allOf:
+          - if:
+              properties:
+                bus-type:
+                  const: 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+            then:
+              properties:
+                bus-width: false
+                data-shift: false
+                pclk-sample: false
+              required:
+                - data-lanes
+            else:
+              properties:
+                data-lanes: false
+          - if:
+              properties:
+                bus-width:
+                  const: 10
+            then:
+              properties:
+                data-shift:
+                  enum: [0, 2]
+          - if:
+              properties:
+                bus-width:
+                  const: 12
+            then:
+              properties:
+                data-shift:
+                  const: 0
+
+        required:
+          - bus-type
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - vaa-supply
+  - vdd-supply
+  - vddio-supply
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/media/video-interfaces.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@10 {
+            compatible = "onnn,ar0144c";
+            reg = <0x10>;
+
+            clocks = <&cam_clk>;
+
+            reset-gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+
+            vaa-supply = <&reg_2v8>;
+            vdd-supply = <&reg_1v2>;
+            vddio-supply = <&reg_1v8>;
+
+            port {
+                ar0144_out: endpoint {
+                    remote-endpoint = <&mipi_csi2_in>;
+                    bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+                    data-lanes = <1 2>;
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index d7c9fced9db1..93f758624830 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1650,6 +1650,12 @@ S:	Supported
 W:	http://www.aquantia.com
 F:	drivers/net/ethernet/aquantia/atlantic/aq_ptp*
 
+AR0144 ONSEMI CAMERA SENSOR DRIVER
+M:	Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
+L:	linux-media@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/onnn,ar0144.yaml
+
 AR0521 ON SEMICONDUCTOR CAMERA SENSOR DRIVER
 M:	Krzysztof Hałasa <khalasa@xxxxxxx>
 L:	linux-media@xxxxxxxxxxxxxxx
-- 
Regards,

Laurent Pinchart





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux