From: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
Extracting common code, to share common code to be used later
by the AXI driver version (ad3552r-axi.c).
Signed-off-by: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
---
drivers/iio/dac/Makefile | 2 +-
drivers/iio/dac/ad3552r-common.c | 163 +++++++++++++++++++++++
drivers/iio/dac/ad3552r.c | 276 ++++-----------------------------------
drivers/iio/dac/ad3552r.h | 199 ++++++++++++++++++++++++++++
4 files changed, 389 insertions(+), 251 deletions(-)
diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile
index 2cf148f16306..56a125f56284 100644
--- a/drivers/iio/dac/Makefile
+++ b/drivers/iio/dac/Makefile
@@ -4,7 +4,7 @@
#
# When adding new entries keep the list in alphabetical order
-obj-$(CONFIG_AD3552R) += ad3552r.o
+obj-$(CONFIG_AD3552R) += ad3552r.o ad3552r-common.o
obj-$(CONFIG_AD5360) += ad5360.o
obj-$(CONFIG_AD5380) += ad5380.o
obj-$(CONFIG_AD5421) += ad5421.o
diff --git a/drivers/iio/dac/ad3552r-common.c b/drivers/iio/dac/ad3552r-common.c
new file mode 100644
index 000000000000..c8ccfbe2e95e
--- /dev/null
+++ b/drivers/iio/dac/ad3552r-common.c
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2010-2024 Analog Devices Inc.
+// Copyright (c) 2024 Baylibre, SAS
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
+
+#include "ad3552r.h"
+
+static const s32 ad3552r_ch_ranges[][2] = {
+ [AD3552R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500},
+ [AD3552R_CH_OUTPUT_RANGE_0__5V] = {0, 5000},
+ [AD3552R_CH_OUTPUT_RANGE_0__10V] = {0, 10000},
+ [AD3552R_CH_OUTPUT_RANGE_NEG_5__5V] = {-5000, 5000},
+ [AD3552R_CH_OUTPUT_RANGE_NEG_10__10V] = {-10000, 10000}
+};
+
+static const s32 ad3542r_ch_ranges[][2] = {
+ [AD3542R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500},
+ [AD3542R_CH_OUTPUT_RANGE_0__3V] = {0, 3000},
+ [AD3542R_CH_OUTPUT_RANGE_0__5V] = {0, 5000},
+ [AD3542R_CH_OUTPUT_RANGE_0__10V] = {0, 10000},
+ [AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V] = {-2500, 7500},
+ [AD3542R_CH_OUTPUT_RANGE_NEG_5__5V] = {-5000, 5000}
+};
+
+void ad3552r_calc_custom_gain(u8 p, u8 n, s16 goffs, u16 *reg)
+{
+ *reg = FIELD_PREP(AD3552R_MASK_CH_RANGE_OVERRIDE, 1);
+ *reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_P, p);
+ *reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_N, n);
+ *reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_BIT_8, abs((s32)goffs) >> 8);
+ *reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_POLARITY, (s32)goffs < 0);
+}
+
+int ad3552r_get_ref_voltage(struct device *dev, u32 *val)
+{
+ int voltage, delta = 100000;
+
+ voltage = devm_regulator_get_enable_read_voltage(dev, "vref");
+ if (voltage < 0 && voltage != -ENODEV)
+ return dev_err_probe(dev, voltage,
+ "Error getting vref voltage\n");
+
+ if (voltage == -ENODEV) {
+ if (device_property_read_bool(dev, "adi,vref-out-en"))
+ *val = AD3552R_INTERNAL_VREF_PIN_2P5V;
+ else
+ *val = AD3552R_INTERNAL_VREF_PIN_FLOATING;
+ } else {
+ if (voltage > 2500000 + delta || voltage < 2500000 - delta) {
+ dev_warn(dev, "vref-supply must be 2.5V");
+ return -EINVAL;
+ }
+ *val = AD3552R_EXTERNAL_VREF_PIN_INPUT;
+ }
+
+ return 0;
+}
+
+int ad3552r_get_drive_strength(struct device *dev, u32 *val)
+{
+ int err;
+
+ err = device_property_read_u32(dev, "adi,sdo-drive-strength", val);
+ if (!err && *val > 3) {
+ dev_err(dev,
+ "adi,sdo-drive-strength must be less than 4\n");
+ return -EINVAL;
+ }
+
+ return err;
+}
+
+int ad3552r_get_custom_gain(struct device *dev, struct fwnode_handle *child,
+ u8 *gs_p, u8 *gs_n, u16 *rfb, s16 *goffs)
+{
+ int err;
+ u32 val;
+ struct fwnode_handle *gain_child __free(fwnode_handle)
+ = fwnode_get_named_child_node(child,
+ "custom-output-range-config");
+
+ if (!gain_child)
+ return dev_err_probe(dev, -EINVAL,
+ "custom-output-range-config mandatory\n");
+
+ err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
+ if (err)
+ return dev_err_probe(dev, err,
+ "adi,gain-scaling-p mandatory\n");
+ *gs_p = val;
+
+ err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
+ if (err)
+ return dev_err_probe(dev, err,
+ "adi,gain-scaling-n property mandatory\n");
+ *gs_n = val;
+
+ err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
+ if (err)
+ return dev_err_probe(dev, err,
+ "adi,rfb-ohms mandatoryn");
+ *rfb = val;
+
+ err = fwnode_property_read_u32(gain_child, "adi,gain-offset", &val);
+ if (err)
+ return dev_err_probe(dev, err,
+ "adi,gain-offset mandatory\n");
+ *goffs = val;
+
+ return 0;
+}
+
+static int ad3552r_find_range(u16 id, s32 *vals)
+{
+ int i, len;
+ const s32 (*ranges)[2];
+
+ if (id == AD3542R_ID) {
+ len = ARRAY_SIZE(ad3542r_ch_ranges);
+ ranges = ad3542r_ch_ranges;
+ } else {
+ len = ARRAY_SIZE(ad3552r_ch_ranges);
+ ranges = ad3552r_ch_ranges;
+ }
+
+ for (i = 0; i < len; i++)
+ if (vals[0] == ranges[i][0] * 1000 &&
+ vals[1] == ranges[i][1] * 1000)
+ return i;
+
+ return -EINVAL;
+}
+
+int ad3552r_get_output_range(struct device *dev, enum ad3552r_id chip_id,
+ struct fwnode_handle *child, u32 *val)
+{
+ int ret;
+ s32 vals[2];
+
+ if (!fwnode_property_present(child, "adi,output-range-microvolt"))
+ return -ENOENT;
+
+ ret = fwnode_property_read_u32_array(child,
+ "adi,output-range-microvolt",
+ vals, 2);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "invalid adi,output-range-microvolt\n");
+
+ ret = ad3552r_find_range(chip_id, vals);
+ if (ret < 0)
+ return dev_err_probe(dev, ret,
+ "invalid adi,output-range-microvolt value\n");
+
+ *val = ret;
+
+ return 0;
+}
diff --git a/drivers/iio/dac/ad3552r.c b/drivers/iio/dac/ad3552r.c
index d867de7c90d1..c149be9c8c7d 100644
--- a/drivers/iio/dac/ad3552r.c
+++ b/drivers/iio/dac/ad3552r.c
@@ -11,153 +11,9 @@
#include <linux/iio/trigger_consumer.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
-#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
-/* Register addresses */
-/* Primary address space */
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A 0x00
-#define AD3552R_MASK_SOFTWARE_RESET (BIT(7) | BIT(0))
-#define AD3552R_MASK_ADDR_ASCENSION BIT(5)
-#define AD3552R_MASK_SDO_ACTIVE BIT(4)
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B 0x01
-#define AD3552R_MASK_SINGLE_INST BIT(7)
-#define AD3552R_MASK_SHORT_INSTRUCTION BIT(3)
-#define AD3552R_REG_ADDR_DEVICE_CONFIG 0x02
-#define AD3552R_MASK_DEVICE_STATUS(n) BIT(4 + (n))
-#define AD3552R_MASK_CUSTOM_MODES GENMASK(3, 2)
-#define AD3552R_MASK_OPERATING_MODES GENMASK(1, 0)
-#define AD3552R_REG_ADDR_CHIP_TYPE 0x03
-#define AD3552R_MASK_CLASS GENMASK(7, 0)
-#define AD3552R_REG_ADDR_PRODUCT_ID_L 0x04
-#define AD3552R_REG_ADDR_PRODUCT_ID_H 0x05
-#define AD3552R_REG_ADDR_CHIP_GRADE 0x06
-#define AD3552R_MASK_GRADE GENMASK(7, 4)
-#define AD3552R_MASK_DEVICE_REVISION GENMASK(3, 0)
-#define AD3552R_REG_ADDR_SCRATCH_PAD 0x0A
-#define AD3552R_REG_ADDR_SPI_REVISION 0x0B
-#define AD3552R_REG_ADDR_VENDOR_L 0x0C
-#define AD3552R_REG_ADDR_VENDOR_H 0x0D
-#define AD3552R_REG_ADDR_STREAM_MODE 0x0E
-#define AD3552R_MASK_LENGTH GENMASK(7, 0)
-#define AD3552R_REG_ADDR_TRANSFER_REGISTER 0x0F
-#define AD3552R_MASK_MULTI_IO_MODE GENMASK(7, 6)
-#define AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE BIT(2)
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C 0x10
-#define AD3552R_MASK_CRC_ENABLE (GENMASK(7, 6) |\
- GENMASK(1, 0))
-#define AD3552R_MASK_STRICT_REGISTER_ACCESS BIT(5)
-#define AD3552R_REG_ADDR_INTERFACE_STATUS_A 0x11
-#define AD3552R_MASK_INTERFACE_NOT_READY BIT(7)
-#define AD3552R_MASK_CLOCK_COUNTING_ERROR BIT(5)
-#define AD3552R_MASK_INVALID_OR_NO_CRC BIT(3)
-#define AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER BIT(2)
-#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS BIT(1)
-#define AD3552R_MASK_REGISTER_ADDRESS_INVALID BIT(0)
-#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D 0x14
-#define AD3552R_MASK_ALERT_ENABLE_PULLUP BIT(6)
-#define AD3552R_MASK_MEM_CRC_EN BIT(4)
-#define AD3552R_MASK_SDO_DRIVE_STRENGTH GENMASK(3, 2)
-#define AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN BIT(1)
-#define AD3552R_MASK_SPI_CONFIG_DDR BIT(0)
-#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG 0x15
-#define AD3552R_MASK_IDUMP_FAST_MODE BIT(6)
-#define AD3552R_MASK_SAMPLE_HOLD_DIFFERENTIAL_USER_EN BIT(5)
-#define AD3552R_MASK_SAMPLE_HOLD_USER_TRIM GENMASK(4, 3)
-#define AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE BIT(2)
-#define AD3552R_MASK_REFERENCE_VOLTAGE_SEL GENMASK(1, 0)
-#define AD3552R_REG_ADDR_ERR_ALARM_MASK 0x16
-#define AD3552R_MASK_REF_RANGE_ALARM BIT(6)
-#define AD3552R_MASK_CLOCK_COUNT_ERR_ALARM BIT(5)
-#define AD3552R_MASK_MEM_CRC_ERR_ALARM BIT(4)
-#define AD3552R_MASK_SPI_CRC_ERR_ALARM BIT(3)
-#define AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM BIT(2)
-#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM BIT(1)
-#define AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM BIT(0)
-#define AD3552R_REG_ADDR_ERR_STATUS 0x17
-#define AD3552R_MASK_REF_RANGE_ERR_STATUS BIT(6)
-#define AD3552R_MASK_DUAL_SPI_STREAM_EXCEEDS_DAC_ERR_STATUS BIT(5)
-#define AD3552R_MASK_MEM_CRC_ERR_STATUS BIT(4)
-#define AD3552R_MASK_RESET_STATUS BIT(0)
-#define AD3552R_REG_ADDR_POWERDOWN_CONFIG 0x18
-#define AD3552R_MASK_CH_DAC_POWERDOWN(ch) BIT(4 + (ch))
-#define AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch) BIT(ch)
-#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE 0x19
-#define AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch) ((ch) ? GENMASK(7, 4) :\
- GENMASK(3, 0))
-#define AD3552R_REG_ADDR_CH_OFFSET(ch) (0x1B + (ch) * 2)
-#define AD3552R_MASK_CH_OFFSET_BITS_0_7 GENMASK(7, 0)
-#define AD3552R_REG_ADDR_CH_GAIN(ch) (0x1C + (ch) * 2)
-#define AD3552R_MASK_CH_RANGE_OVERRIDE BIT(7)
-#define AD3552R_MASK_CH_GAIN_SCALING_N GENMASK(6, 5)
-#define AD3552R_MASK_CH_GAIN_SCALING_P GENMASK(4, 3)
-#define AD3552R_MASK_CH_OFFSET_POLARITY BIT(2)
-#define AD3552R_MASK_CH_OFFSET_BIT_8 BIT(0)
-/*
- * Secondary region
- * For multibyte registers specify the highest address because the access is
- * done in descending order
- */
-#define AD3552R_SECONDARY_REGION_START 0x28
-#define AD3552R_REG_ADDR_HW_LDAC_16B 0x28
-#define AD3552R_REG_ADDR_CH_DAC_16B(ch) (0x2C - (1 - ch) * 2)
-#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B 0x2E
-#define AD3552R_REG_ADDR_CH_SELECT_16B 0x2F
-#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B 0x31
-#define AD3552R_REG_ADDR_SW_LDAC_16B 0x32
-#define AD3552R_REG_ADDR_CH_INPUT_16B(ch) (0x36 - (1 - ch) * 2)
-/* 3 bytes registers */
-#define AD3552R_REG_START_24B 0x37
-#define AD3552R_REG_ADDR_HW_LDAC_24B 0x37
-#define AD3552R_REG_ADDR_CH_DAC_24B(ch) (0x3D - (1 - ch) * 3)
-#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B 0x40
-#define AD3552R_REG_ADDR_CH_SELECT_24B 0x41
-#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B 0x44
-#define AD3552R_REG_ADDR_SW_LDAC_24B 0x45
-#define AD3552R_REG_ADDR_CH_INPUT_24B(ch) (0x4B - (1 - ch) * 3)
-
-/* Useful defines */
-#define AD3552R_MAX_CH 2
-#define AD3552R_MASK_CH(ch) BIT(ch)
-#define AD3552R_MASK_ALL_CH GENMASK(1, 0)
-#define AD3552R_MAX_REG_SIZE 3
-#define AD3552R_READ_BIT BIT(7)
-#define AD3552R_ADDR_MASK GENMASK(6, 0)
-#define AD3552R_MASK_DAC_12B 0xFFF0
-#define AD3552R_DEFAULT_CONFIG_B_VALUE 0x8
-#define AD3552R_SCRATCH_PAD_TEST_VAL1 0x34
-#define AD3552R_SCRATCH_PAD_TEST_VAL2 0xB2
-#define AD3552R_GAIN_SCALE 1000
-#define AD3552R_LDAC_PULSE_US 100
-
-enum ad3552r_ch_vref_select {
- /* Internal source with Vref I/O floating */
- AD3552R_INTERNAL_VREF_PIN_FLOATING,
- /* Internal source with Vref I/O at 2.5V */
- AD3552R_INTERNAL_VREF_PIN_2P5V,
- /* External source with Vref I/O as input */
- AD3552R_EXTERNAL_VREF_PIN_INPUT
-};
-
-enum ad3552r_id {
- AD3541R_ID = 0x400b,
- AD3542R_ID = 0x4009,
- AD3551R_ID = 0x400a,
- AD3552R_ID = 0x4008,
-};
-
-enum ad3552r_ch_output_range {
- /* Range from 0 V to 2.5 V. Requires Rfb1x connection */
- AD3552R_CH_OUTPUT_RANGE_0__2P5V,
- /* Range from 0 V to 5 V. Requires Rfb1x connection */
- AD3552R_CH_OUTPUT_RANGE_0__5V,
- /* Range from 0 V to 10 V. Requires Rfb2x connection */
- AD3552R_CH_OUTPUT_RANGE_0__10V,
- /* Range from -5 V to 5 V. Requires Rfb2x connection */
- AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
- /* Range from -10 V to 10 V. Requires Rfb4x connection */
- AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
-};
+#include "ad3552r.h"
static const s32 ad3552r_ch_ranges[][2] = {
[AD3552R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500},
@@ -167,21 +23,6 @@ static const s32 ad3552r_ch_ranges[][2] = {
[AD3552R_CH_OUTPUT_RANGE_NEG_10__10V] = {-10000, 10000}
};
-enum ad3542r_ch_output_range {
- /* Range from 0 V to 2.5 V. Requires Rfb1x connection */
- AD3542R_CH_OUTPUT_RANGE_0__2P5V,
- /* Range from 0 V to 3 V. Requires Rfb1x connection */
- AD3542R_CH_OUTPUT_RANGE_0__3V,
- /* Range from 0 V to 5 V. Requires Rfb1x connection */
- AD3542R_CH_OUTPUT_RANGE_0__5V,
- /* Range from 0 V to 10 V. Requires Rfb2x connection */
- AD3542R_CH_OUTPUT_RANGE_0__10V,
- /* Range from -2.5 V to 7.5 V. Requires Rfb2x connection */
- AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
- /* Range from -5 V to 5 V. Requires Rfb2x connection */
- AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
-};
-
static const s32 ad3542r_ch_ranges[][2] = {
[AD3542R_CH_OUTPUT_RANGE_0__2P5V] = {0, 2500},
[AD3542R_CH_OUTPUT_RANGE_0__3V] = {0, 3000},
@@ -733,72 +574,32 @@ static void ad3552r_calc_gain_and_offset(struct ad3552r_desc *dac, s32 ch)
dac->ch_data[ch].offset_dec = div_s64(tmp, span);
}
-static int ad3552r_find_range(const struct ad3552r_model_data *model_data,
- s32 *vals)
-{
- int i;
-
- for (i = 0; i < model_data->num_ranges; i++)
- if (vals[0] == model_data->ranges_table[i][0] * 1000 &&
- vals[1] == model_data->ranges_table[i][1] * 1000)
- return i;
-
- return -EINVAL;
-}
-
static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
struct fwnode_handle *child,
u32 ch)
{
struct device *dev = &dac->spi->dev;
- u32 val;
int err;
u8 addr;
- u16 reg = 0, offset;
-
- struct fwnode_handle *gain_child __free(fwnode_handle)
- = fwnode_get_named_child_node(child,
- "custom-output-range-config");
- if (!gain_child)
- return dev_err_probe(dev, -EINVAL,
- "mandatory custom-output-range-config property missing\n");
-
- dac->ch_data[ch].range_override = 1;
- reg |= FIELD_PREP(AD3552R_MASK_CH_RANGE_OVERRIDE, 1);
-
- err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-p", &val);
- if (err)
- return dev_err_probe(dev, err,
- "mandatory adi,gain-scaling-p property missing\n");
- reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_P, val);
- dac->ch_data[ch].p = val;
+ u16 reg = 0;
- err = fwnode_property_read_u32(gain_child, "adi,gain-scaling-n", &val);
+ err = ad3552r_get_custom_gain(dev, child,
+ &dac->ch_data[ch].p,
+ &dac->ch_data[ch].n,
+ &dac->ch_data[ch].rfb,
+ &dac->ch_data[ch].gain_offset);
if (err)
- return dev_err_probe(dev, err,
- "mandatory adi,gain-scaling-n property missing\n");
- reg |= FIELD_PREP(AD3552R_MASK_CH_GAIN_SCALING_N, val);
- dac->ch_data[ch].n = val;
-
- err = fwnode_property_read_u32(gain_child, "adi,rfb-ohms", &val);
- if (err)
- return dev_err_probe(dev, err,
- "mandatory adi,rfb-ohms property missing\n");
- dac->ch_data[ch].rfb = val;
+ return err;
- err = fwnode_property_read_u32(gain_child, "adi,gain-offset", &val);
- if (err)
- return dev_err_probe(dev, err,
- "mandatory adi,gain-offset property missing\n");
- dac->ch_data[ch].gain_offset = val;
+ dac->ch_data[ch].range_override = 1;
- offset = abs((s32)val);
- reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_BIT_8, (offset >> 8));
+ ad3552r_calc_custom_gain(dac->ch_data[ch].p, dac->ch_data[ch].n,
+ dac->ch_data[ch].gain_offset, ®);
- reg |= FIELD_PREP(AD3552R_MASK_CH_OFFSET_POLARITY, (s32)val < 0);
addr = AD3552R_REG_ADDR_CH_GAIN(ch);
err = ad3552r_write_reg(dac, addr,
- offset & AD3552R_MASK_CH_OFFSET_BITS_0_7);
+ abs((s32)dac->ch_data[ch].gain_offset) &
+ AD3552R_MASK_CH_OFFSET_BITS_0_7);
if (err)
return dev_err_probe(dev, err, "Error writing register\n");
@@ -812,30 +613,17 @@ static int ad3552r_configure_custom_gain(struct ad3552r_desc *dac,
static int ad3552r_configure_device(struct ad3552r_desc *dac)
{
struct device *dev = &dac->spi->dev;
- int err, cnt = 0, voltage, delta = 100000;
- u32 vals[2], val, ch;
+ int err, cnt = 0;
+ u32 val, ch;
dac->gpio_ldac = devm_gpiod_get_optional(dev, "ldac", GPIOD_OUT_HIGH);
if (IS_ERR(dac->gpio_ldac))
return dev_err_probe(dev, PTR_ERR(dac->gpio_ldac),
"Error getting gpio ldac");
- voltage = devm_regulator_get_enable_read_voltage(dev, "vref");
- if (voltage < 0 && voltage != -ENODEV)
- return dev_err_probe(dev, voltage, "Error getting vref voltage\n");
-
- if (voltage == -ENODEV) {
- if (device_property_read_bool(dev, "adi,vref-out-en"))
- val = AD3552R_INTERNAL_VREF_PIN_2P5V;
- else
- val = AD3552R_INTERNAL_VREF_PIN_FLOATING;
- } else {
- if (voltage > 2500000 + delta || voltage < 2500000 - delta) {
- dev_warn(dev, "vref-supply must be 2.5V");
- return -EINVAL;
- }
- val = AD3552R_EXTERNAL_VREF_PIN_INPUT;
- }
+ err = ad3552r_get_ref_voltage(dev, &val);
+ if (err)
+ return err;
err = ad3552r_update_reg_field(dac,
AD3552R_REG_ADDR_SH_REFERENCE_CONFIG,
@@ -844,13 +632,10 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
if (err)
return err;
- err = device_property_read_u32(dev, "adi,sdo-drive-strength", &val);
+ err = ad3552r_get_drive_strength(dev, &val);
+ if (err)
+ return err;
if (!err) {
- if (val > 3) {
- dev_err(dev, "adi,sdo-drive-strength must be less than 4\n");
- return -EINVAL;
- }
-
err = ad3552r_update_reg_field(dac,
AD3552R_REG_ADDR_INTERFACE_CONFIG_D,
AD3552R_MASK_SDO_DRIVE_STRENGTH,
@@ -875,21 +660,12 @@ static int ad3552r_configure_device(struct ad3552r_desc *dac)
"reg must be less than %d\n",
dac->model_data->num_hw_channels);
- if (fwnode_property_present(child, "adi,output-range-microvolt")) {
- err = fwnode_property_read_u32_array(child,
- "adi,output-range-microvolt",
- vals,
- 2);
- if (err)
- return dev_err_probe(dev, err,
- "adi,output-range-microvolt property could not be parsed\n");
-
- err = ad3552r_find_range(dac->model_data, vals);
- if (err < 0)
- return dev_err_probe(dev, err,
- "Invalid adi,output-range-microvolt value\n");
+ err = ad3552r_get_output_range(dev, dac->model_data->chip_id,
+ child, &val);
+ if (err && err != -ENOENT)
+ return err;
- val = err;
+ if (!err) {
if (ch == 0)
val = FIELD_PREP(AD3552R_MASK_CH_OUTPUT_RANGE_SEL(0), val);
else
diff --git a/drivers/iio/dac/ad3552r.h b/drivers/iio/dac/ad3552r.h
new file mode 100644
index 000000000000..cada1f12f000
--- /dev/null
+++ b/drivers/iio/dac/ad3552r.h
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AD3552R Digital <-> Analog converters common header
+ *
+ * Copyright 2024 Analog Devices Inc.
+ * Author: Angelo Dureghello <adureghello@xxxxxxxxxxxx>
+ */
+
+#ifndef __DRIVERS_IIO_DAC_AD3552R_H__
+#define __DRIVERS_IIO_DAC_AD3552R_H__
+
+/* Register addresses */
+/* Primary address space */
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_A 0x00
+#define AD3552R_MASK_SOFTWARE_RESET (BIT(7) | BIT(0))
+#define AD3552R_MASK_ADDR_ASCENSION BIT(5)
+#define AD3552R_MASK_SDO_ACTIVE BIT(4)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_B 0x01
+#define AD3552R_MASK_SINGLE_INST BIT(7)
+#define AD3552R_MASK_SHORT_INSTRUCTION BIT(3)
+#define AD3552R_REG_ADDR_DEVICE_CONFIG 0x02
+#define AD3552R_MASK_DEVICE_STATUS(n) BIT(4 + (n))
+#define AD3552R_MASK_CUSTOM_MODES GENMASK(3, 2)
+#define AD3552R_MASK_OPERATING_MODES GENMASK(1, 0)
+#define AD3552R_REG_ADDR_CHIP_TYPE 0x03
+#define AD3552R_MASK_CLASS GENMASK(7, 0)
+#define AD3552R_REG_ADDR_PRODUCT_ID_L 0x04
+#define AD3552R_REG_ADDR_PRODUCT_ID_H 0x05
+#define AD3552R_REG_ADDR_CHIP_GRADE 0x06
+#define AD3552R_MASK_GRADE GENMASK(7, 4)
+#define AD3552R_MASK_DEVICE_REVISION GENMASK(3, 0)
+#define AD3552R_REG_ADDR_SCRATCH_PAD 0x0A
+#define AD3552R_REG_ADDR_SPI_REVISION 0x0B
+#define AD3552R_REG_ADDR_VENDOR_L 0x0C
+#define AD3552R_REG_ADDR_VENDOR_H 0x0D
+#define AD3552R_REG_ADDR_STREAM_MODE 0x0E
+#define AD3552R_MASK_LENGTH GENMASK(7, 0)
+#define AD3552R_REG_ADDR_TRANSFER_REGISTER 0x0F
+#define AD3552R_MASK_MULTI_IO_MODE GENMASK(7, 6)
+#define AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE BIT(2)
+#define AD3552R_MASK_DUAL_SPI BIT(6)
+#define AD3552R_MASK_QUAD_SPI BIT(7)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_C 0x10
+#define AD3552R_MASK_CRC_ENABLE (GENMASK(7, 6) |\
+ GENMASK(1, 0))
+#define AD3552R_MASK_STRICT_REGISTER_ACCESS BIT(5)
+#define AD3552R_REG_ADDR_INTERFACE_STATUS_A 0x11
+#define AD3552R_MASK_INTERFACE_NOT_READY BIT(7)
+#define AD3552R_MASK_CLOCK_COUNTING_ERROR BIT(5)
+#define AD3552R_MASK_INVALID_OR_NO_CRC BIT(3)
+#define AD3552R_MASK_WRITE_TO_READ_ONLY_REGISTER BIT(2)
+#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS BIT(1)
+#define AD3552R_MASK_REGISTER_ADDRESS_INVALID BIT(0)
+#define AD3552R_REG_ADDR_INTERFACE_CONFIG_D 0x14
+#define AD3552R_MASK_ALERT_ENABLE_PULLUP BIT(6)
+#define AD3552R_MASK_MEM_CRC_EN BIT(4)
+#define AD3552R_MASK_SDO_DRIVE_STRENGTH GENMASK(3, 2)
+#define AD3552R_MASK_DUAL_SPI_SYNCHROUNOUS_EN BIT(1)
+#define AD3552R_MASK_SPI_CONFIG_DDR BIT(0)
+#define AD3552R_REG_ADDR_SH_REFERENCE_CONFIG 0x15
+#define AD3552R_MASK_IDUMP_FAST_MODE BIT(6)
+#define AD3552R_MASK_SAMPLE_HOLD_DIFF_USER_EN BIT(5)
+#define AD3552R_MASK_SAMPLE_HOLD_USER_TRIM GENMASK(4, 3)
+#define AD3552R_MASK_SAMPLE_HOLD_USER_ENABLE BIT(2)
+#define AD3552R_MASK_REFERENCE_VOLTAGE_SEL GENMASK(1, 0)
+#define AD3552R_REG_ADDR_ERR_ALARM_MASK 0x16
+#define AD3552R_MASK_REF_RANGE_ALARM BIT(6)
+#define AD3552R_MASK_CLOCK_COUNT_ERR_ALARM BIT(5)
+#define AD3552R_MASK_MEM_CRC_ERR_ALARM BIT(4)
+#define AD3552R_MASK_SPI_CRC_ERR_ALARM BIT(3)
+#define AD3552R_MASK_WRITE_TO_READ_ONLY_ALARM BIT(2)
+#define AD3552R_MASK_PARTIAL_REGISTER_ACCESS_ALARM BIT(1)
+#define AD3552R_MASK_REGISTER_ADDRESS_INVALID_ALARM BIT(0)
+#define AD3552R_REG_ADDR_ERR_STATUS 0x17
+#define AD3552R_MASK_REF_RANGE_ERR_STATUS BIT(6)
+#define AD3552R_MASK_STREAM_EXCEEDS_DAC_ERR_STATUS BIT(5)
+#define AD3552R_MASK_MEM_CRC_ERR_STATUS BIT(4)
+#define AD3552R_MASK_RESET_STATUS BIT(0)
+#define AD3552R_REG_ADDR_POWERDOWN_CONFIG 0x18
+#define AD3552R_MASK_CH_DAC_POWERDOWN(ch) BIT(4 + (ch))
+#define AD3552R_MASK_CH_AMPLIFIER_POWERDOWN(ch) BIT(ch)
+#define AD3552R_REG_ADDR_CH0_CH1_OUTPUT_RANGE 0x19
+#define AD3552R_MASK_CH0_RANGE GENMASK(2, 0)
+#define AD3552R_MASK_CH1_RANGE GENMASK(6, 4)
+#define AD3552R_MASK_CH_OUTPUT_RANGE GENMASK(7, 0)
+#define AD3552R_MASK_CH_OUTPUT_RANGE_SEL(ch) ((ch) ? \
+ GENMASK(7, 4) : \
+ GENMASK(3, 0))
+#define AD3552R_REG_ADDR_CH_OFFSET(ch) (0x1B + (ch) * 2)
+#define AD3552R_MASK_CH_OFFSET_BITS_0_7 GENMASK(7, 0)
+#define AD3552R_REG_ADDR_CH_GAIN(ch) (0x1C + (ch) * 2)
+#define AD3552R_MASK_CH_RANGE_OVERRIDE BIT(7)
+#define AD3552R_MASK_CH_GAIN_SCALING_N GENMASK(6, 5)
+#define AD3552R_MASK_CH_GAIN_SCALING_P GENMASK(4, 3)
+#define AD3552R_MASK_CH_OFFSET_POLARITY BIT(2)
+#define AD3552R_MASK_CH_OFFSET_BIT_8 BIT(0)
+/*
+ * Secondary region
+ * For multibyte registers specify the highest address because the access is
+ * done in descending order
+ */
+#define AD3552R_SECONDARY_REGION_START 0x28
+#define AD3552R_REG_ADDR_HW_LDAC_16B 0x28
+#define AD3552R_REG_ADDR_CH_DAC_16B(ch) (0x2C - (1 - (ch)) * 2)
+#define AD3552R_REG_ADDR_DAC_PAGE_MASK_16B 0x2E
+#define AD3552R_REG_ADDR_CH_SELECT_16B 0x2F
+#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_16B 0x31
+#define AD3552R_REG_ADDR_SW_LDAC_16B 0x32
+#define AD3552R_REG_ADDR_CH_INPUT_16B(ch) (0x36 - (1 - (ch)) * 2)
+/* 3 bytes registers */
+#define AD3552R_REG_START_24B 0x37
+#define AD3552R_REG_ADDR_HW_LDAC_24B 0x37
+#define AD3552R_REG_ADDR_CH_DAC_24B(ch) (0x3D - (1 - (ch)) * 3)
+#define AD3552R_REG_ADDR_DAC_PAGE_MASK_24B 0x40
+#define AD3552R_REG_ADDR_CH_SELECT_24B 0x41
+#define AD3552R_REG_ADDR_INPUT_PAGE_MASK_24B 0x44
+#define AD3552R_REG_ADDR_SW_LDAC_24B 0x45
+#define AD3552R_REG_ADDR_CH_INPUT_24B(ch) (0x4B - (1 - (ch)) * 3)
+
+/* Useful defines */
+#define AD3552R_MAX_CH 2
+#define AD3552R_MASK_CH(ch) BIT(ch)
+#define AD3552R_MASK_ALL_CH GENMASK(1, 0)
+#define AD3552R_MAX_REG_SIZE 3
+#define AD3552R_READ_BIT BIT(7)
+#define AD3552R_ADDR_MASK GENMASK(6, 0)
+#define AD3552R_MASK_DAC_12B GENMASK(15, 4)
+#define AD3552R_DEFAULT_CONFIG_B_VALUE 0x8
+#define AD3552R_SCRATCH_PAD_TEST_VAL1 0x34
+#define AD3552R_SCRATCH_PAD_TEST_VAL2 0xB2
+#define AD3552R_GAIN_SCALE 1000
+#define AD3552R_LDAC_PULSE_US 100
+
+#define AD3552R_AXI_REG_MAX 0x35
+#define AD3552R_REF_INIT 0x00
+#define AD3552R_STREAM_2BYTE_LOOP 0x02
+#define AD3552R_STREAM_4BYTE_LOOP 0x04
+
+#define AD3552R_CH0_ACTIVE BIT(0)
+#define AD3552R_CH1_ACTIVE BIT(1)
+#define AD3552R_CH0_CH1_ACTIVE (AD3552R_CH0_ACTIVE | \
+ AD3552R_CH1_ACTIVE)
+
+#define AD3552R_TRANSFER_INIT (AD3552R_MASK_QUAD_SPI | \
+ AD3552R_MASK_STREAM_LENGTH_KEEP_VALUE)
+
+enum ad3552r_id {
+ AD3541R_ID = 0x400b,
+ AD3542R_ID = 0x4009,
+ AD3551R_ID = 0x400a,
+ AD3552R_ID = 0x4008,
+};
+
+enum ad3552r_ch_vref_select {
+ /* Internal source with Vref I/O floating */
+ AD3552R_INTERNAL_VREF_PIN_FLOATING,
+ /* Internal source with Vref I/O at 2.5V */
+ AD3552R_INTERNAL_VREF_PIN_2P5V,
+ /* External source with Vref I/O as input */
+ AD3552R_EXTERNAL_VREF_PIN_INPUT
+};
+
+enum ad3542r_ch_output_range {
+ /* Range from 0 V to 2.5 V. Requires Rfb1x connection */
+ AD3542R_CH_OUTPUT_RANGE_0__2P5V,
+ /* Range from 0 V to 3 V. Requires Rfb1x connection */
+ AD3542R_CH_OUTPUT_RANGE_0__3V,
+ /* Range from 0 V to 5 V. Requires Rfb1x connection */
+ AD3542R_CH_OUTPUT_RANGE_0__5V,
+ /* Range from 0 V to 10 V. Requires Rfb2x connection */
+ AD3542R_CH_OUTPUT_RANGE_0__10V,
+ /* Range from -2.5 V to 7.5 V. Requires Rfb2x connection */
+ AD3542R_CH_OUTPUT_RANGE_NEG_2P5__7P5V,
+ /* Range from -5 V to 5 V. Requires Rfb2x connection */
+ AD3542R_CH_OUTPUT_RANGE_NEG_5__5V,
+};
+
+enum ad3552r_ch_output_range {
+ /* Range from 0 V to 2.5 V. Requires Rfb1x connection */
+ AD3552R_CH_OUTPUT_RANGE_0__2P5V,
+ /* Range from 0 V to 5 V. Requires Rfb1x connection */
+ AD3552R_CH_OUTPUT_RANGE_0__5V,
+ /* Range from 0 V to 10 V. Requires Rfb2x connection */
+ AD3552R_CH_OUTPUT_RANGE_0__10V,
+ /* Range from -5 V to 5 V. Requires Rfb2x connection */
+ AD3552R_CH_OUTPUT_RANGE_NEG_5__5V,
+ /* Range from -10 V to 10 V. Requires Rfb4x connection */
+ AD3552R_CH_OUTPUT_RANGE_NEG_10__10V,
+};
+
+int ad3552r_get_output_range(struct device *dev, enum ad3552r_id id,
+ struct fwnode_handle *child, u32 *val);
+int ad3552r_get_custom_gain(struct device *dev, struct fwnode_handle *child,
+ u8 *gs_p, u8 *gs_n, u16 *rfb, s16 *goffs);
+void ad3552r_calc_custom_gain(u8 p, u8 n, s16 goffs, u16 *reg);
+int ad3552r_get_ref_voltage(struct device *dev, u32 *val);
+int ad3552r_get_drive_strength(struct device *dev, u32 *val);
+
+#endif /* __DRIVERS_IIO_DAC_AD3552R_H__ */
--
2.45.0.rc1
