On Thu, 5 Sept 2024 at 15:20, Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> From: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
>
> Add a node for the PMU of the WCN6855 and rework the inputs of the wifi
> and bluetooth nodes to consume the PMU's outputs.
>
> Tested-by: Steev Klimaszewski <steev@xxxxxxxx> # Thinkpad X13s
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> .../qcom/sc8280xp-lenovo-thinkpad-x13s.dts | 98 ++++++++++++++++---
> 1 file changed, 86 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> index 6a28cab97189..88b31550f9df 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
> @@ -400,6 +400,67 @@ usb1_sbu_mux: endpoint {
> };
> };
> };
> +
> + wcn6855-pmu {
> + compatible = "qcom,wcn6855-pmu";
> +
> + pinctrl-0 = <&wlan_en>;
pinctrl for the bt-enable pin?
> + pinctrl-names = "default";
> +
> + wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> + bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
> +
--
With best wishes
Dmitry
