On Thu, Sep 05, 2024 at 01:49:03AM +0000, Bough Chen wrote:
>
> > -----Original Message-----
> > From: Fabio Estevam <festevam@xxxxxxxxx>
> > Sent: 2024年9月5日 9:38
> > To: Bough Chen <haibo.chen@xxxxxxx>
> > Cc: Han Xu <han.xu@xxxxxxx>; yogeshgaur.83@xxxxxxxxx;
> > broonie@xxxxxxxxxx; robh@xxxxxxxxxx; krzk+dt@xxxxxxxxxx;
> > conor+dt@xxxxxxxxxx; shawnguo@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx;
> > kernel@xxxxxxxxxxxxxx; singh.kuldeep87k@xxxxxxxxx; hs@xxxxxxx;
> > linux-spi@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Subject: Re: [PATCH v2 2/3] spi: fspi: add support for imx8ulp
> >
> > Hi Haibo,
> >
> > On Wed, Sep 4, 2024 at 10:26 PM <haibo.chen@xxxxxxx> wrote:
> >
> > > @@ -373,6 +367,16 @@ static struct nxp_fspi_devtype_data imx8dxl_data =
> > {
> > > .txfifo = SZ_1K, /* (128 * 64 bits) */
> > > .ahb_buf_size = SZ_2K, /* (256 * 64 bits) */
> > > .quirks = FSPI_QUIRK_USE_IP_ONLY,
> > > + .lut_num = 32,
> > > + .little_endian = true, /* little-endian */
> >
> > The addition of little_endian to imx8dl should be a separate patch.
>
> Hi Fabio,
>
> I only add the .lut_num here, do not touch .lettle_endian here, and I add another 8ulp in the follow line, but format patch show in this way. Anything I can do to adjust how to format patch?
you can try below diff option.
--patience
Generate a diff using the "patience diff" algorithm.
--histogram
Generate a diff using the "histogram diff" algorithm.
--anchored=<text>
Generate a diff using the "anchored diff" algorithm.
I suggest split to two patches, one patch convert to hardcode 16 to
lut_num, no function change. The other one is add 7ulp part.
Frank
>
> Best Regards
> Haibo Chen
> >
> > The comment is pointless too.
