[PATCH 1/3] arm64: dts: qcom: sc7280: convert usb_2 to support multiple ports

[Caleb Connolly <caleb.connolly@xxxxxxxxxx>]

We might have more than one port, so use ports instead for the second
USB controllers.

Signed-off-by: Caleb Connolly <caleb.connolly@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 3d8410683402..06a74601c2d7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3712,11 +3712,23 @@ usb_2_dwc3: usb@8c00000 {
 				phy-names = "usb2-phy";
 				maximum-speed = "high-speed";
 				usb-role-switch;
 
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+						usb_2_dwc3_hs: endpoint {
+						};
+					};
+
+
+					port@1 {
+						usb2_role_switch: endpoint {
+							remote-endpoint = <&eud_ep>;
+						};
 					};
 				};
 			};
 		};

-- 
2.46.0