Hi Krzysztof,
Thanks for your reply.
On 2024/9/3 22:11, Krzysztof Kozlowski wrote:
[You don't often get email from krzk@xxxxxxxxxx. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
[ EXTERNAL EMAIL ]
On 03/09/2024 08:57, Keke Li via B4 Relay wrote:
From: Keke Li <keke.li@xxxxxxxxxxx>
c3-mipi-adapter is used to organize mipi data and
send raw data to ISP module.
Signed-off-by: Keke Li <keke.li@xxxxxxxxxxx>
---
.../bindings/media/amlogic,c3-mipi-adapter.yaml | 114 +++++++++++++++++++++
1 file changed, 114 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
new file mode 100644
index 000000000000..e1873fe829c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/amlogic,c3-mipi-adapter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic C3 MIPI adapter receiver
+
+maintainers:
+ - Keke Li <keke.li@xxxxxxxxxxx>
+
+description: |-
Same comment.
OK, get it.
+ MIPI adapter is used to convert the MIPI CSI-2 data
+ into an ISP supported data format.
+
+properties:
+ compatible:
+ enum:
+ - amlogic,c3-mipi-adapter
+
+ reg:
+ minItems: 3
Same comment.
OK, get it.
+ maxItems: 3
+
+ reg-names:
+ items:
+ - const: adap_top
+ - const: adap_fd
+ - const: adap_rd
Same comment.
OK, get it.
+
+ power-domains:
+ maxItems: 1
+
+ clocks:
+ minItems: 2
Same comment.
OK, get it.
+
+ clock-names:
+ items:
+ - const: vapb
+ - const: adap
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: input port node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description: output port node.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - power-domains
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/amlogic,c3-peripherals-clkc.h>
+ #include <dt-bindings/power/amlogic,c3-pwrc.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ adap: adap@ff010000 {
+ compatible = "amlogic,c3-mipi-adapter";
+
Same comments.
OK, get it.
Best regards,
Krzysztof
