Re: [PATCH v2 15/21] dt-bindings: i2c: document support for SA8255p

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 03, 2024 at 03:02:34PM -0700, Nikunj Kela wrote:
> Add compatible representing i2c support on SA8255p.
> 
> Clocks and interconnects are being configured in Firmware VM
> on SA8255p, therefore making them optional.
> 
> CC: Praveen Talari <quic_ptalari@xxxxxxxxxxx>
> Signed-off-by: Nikunj Kela <quic_nkela@xxxxxxxxxxx>
> ---
>  .../bindings/i2c/qcom,i2c-geni-qcom.yaml      | 33 +++++++++++++++++--
>  1 file changed, 31 insertions(+), 2 deletions(-)
> 

I don't know what to do with this patch. Using specific compatibles next
to generic compatible is just wrong, although mistake was probably
allowing generic compatible. The patch does not explain the differences
in interface which would explain why devices are not compatible. In the
same time my advice of separate binding was not followed, because maybe
these devices are compatible? But then it should be expressed...

You have entire commit msg to explain what and why.

> diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> index 9f66a3bb1f80..b477fae734b6 100644
> --- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> +++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
> @@ -15,6 +15,7 @@ properties:
>      enum:
>        - qcom,geni-i2c
>        - qcom,geni-i2c-master-hub
> +      - qcom,sa8255p-geni-i2c
>  
>    clocks:
>      minItems: 1
> @@ -69,8 +70,6 @@ properties:
>  required:
>    - compatible
>    - interrupts
> -  - clocks
> -  - clock-names
>    - reg
>  
>  allOf:
> @@ -81,6 +80,10 @@ allOf:
>            contains:
>              const: qcom,geni-i2c-master-hub
>      then:
> +      required:
> +        - clocks
> +        - clock-names


So it is required here?

> +
>        properties:
>          clocks:
>            minItems: 2
> @@ -100,7 +103,21 @@ allOf:
>            items:
>              - const: qup-core
>              - const: qup-config
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,sa8255p-geni-i2c
> +    then:
> +      required:
> +        - power-domains
> +

And possible here? I assume with the same clocks? The same for
interconnects - same values are valid?

>      else:
> +      required:
> +        - clocks
> +        - clock-names

And clocks are required again?

> +
>        properties:
>          clocks:
>            maxItems: 1

Eeee? So now all other variants have max 1 clock?

Nope, this wasn't ever tested on real DTS.

Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux