This adds the bindings documentation for the 14-bit High Voltage, High Current, Waveform Generator Digital-to-Analog converter. Signed-off-by: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx> --- .../bindings/iio/dac/adi,ad8460.yaml | 154 ++++++++++++++++++ MAINTAINERS | 7 + 2 files changed, 161 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml new file mode 100644 index 000000000000..da53bae4efed --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2024 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/adi,ad8460.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD8460 DAC + +maintainers: + - Mariel Tinaco <mariel.tinaco@xxxxxxxxxx> + +description: | + Analog Devices AD8460 110 V High Voltage, 1 A High Current, + Arbitrary Waveform Generator with Integrated 14-Bit High Speed DAC + https://www.analog.com/media/en/technical-documentation/data-sheets/ad8460.pdf + +properties: + compatible: + enum: + - adi,ad8460 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + dmas: + maxItems: 1 + + dma-names: + items: + - const: tx + + spi-max-frequency: + maximum: 20000000 + + hvcc-supply: + description: Positive high voltage power supply line + + hvee-supply: + description: Negative high voltage power supply line + + vcc-5v-supply: + description: Low voltage power supply + + vref-5v-supply: + description: Reference voltage for analog low voltage + + dvdd-3p3v-supply: + description: Digital supply bypass + + avdd-3p3v-supply: + description: Analog supply bypass + + refio-1p2v-supply: + description: Drive voltage in the range of 1.2V maximum to as low as + low as 0.12V through the REF_IO pin to adjust full scale output span + + adi,external-resistor-ohms: + description: Specify value of external resistor connected to FS_ADJ pin + to establish internal HVDAC's reference current I_REF + default: 2000 + minimum: 2000 + maximum: 20000 + + adi,range-microvolt: + description: Voltage output range specified as <minimum, maximum> + oneOf: + - items: + - enum: [0, -10000000, -20000000, -30000000, -40000000, -55000000] + - enum: [10000000, 20000000, 30000000, 40000000, 55000000] + + adi,range-microamp: + description: Current output range specified as <minimum, maximum> + oneOf: + - items: + - enum: [-50000, -100000, -300000, -500000, -1000000] + - enum: [50000, 100000, 300000, 500000, 1000000] + - items: + - const: 0 + - enum: [50000, 100000, 300000, 500000, 1000000] + + adi,max-millicelsius: + description: Overtemperature threshold + default: 50000 + minimum: 20000 + maximum: 150000 + + shutdown-reset-gpios: + description: Corresponds to SDN_RESET pin. To exit shutdown + or sleep mode, pulse SDN_RESET HIGH, then leave LOW. + maxItems: 1 + + reset-gpios: + description: Manual Power On Reset (POR). Pull this GPIO pin + LOW and then HIGH to reset all digital registers to default + maxItems: 1 + + shutdown-gpios: + description: Corresponds to SDN_IO pin. Shutdown may be + initiated by the user, by pulsing SDN_IO high. To exit shutdown, + pulse SDN_IO low, then float. + maxItems: 1 + +required: + - compatible + - reg + - clocks + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "adi,ad8460"; + reg = <0>; + spi-max-frequency = <8000000>; + + dmas = <&tx_dma 0>; + dma-names = "tx"; + + shutdown-reset-gpios = <&gpio 86 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 91 GPIO_ACTIVE_LOW>; + shutdown-gpios = <&gpio 88 GPIO_ACTIVE_HIGH>; + + clocks = <&sync_ext_clk>; + + hvcc-supply = <&hvcc>; + hvee-supply = <&hvee>; + vcc-5v-supply = <&vcc_5>; + vref-5v-supply = <&vref_5>; + dvdd-3p3v-supply = <&dvdd_3_3>; + avdd-3p3v-supply = <&avdd_3_3>; + refio-1p2v-supply = <&refio_1_2>; + + adi,external-resistor-ohms = <2000>; + adi,range-microvolt = <(-40000000) 40000000>; + adi,range-microamp = <0 50000>; + adi,max-millicelsius = <50000>; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 417c6751c0dc..e0509c9f5545 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1320,6 +1320,13 @@ F: Documentation/ABI/testing/debugfs-iio-ad9467 F: Documentation/devicetree/bindings/iio/adc/adi,ad9467.yaml F: drivers/iio/adc/ad9467.c +ANALOG DEVICES INC AD8460 DRIVER +M: Mariel Tinaco <Mariel.Tinaco@xxxxxxxxxx> +L: linux-iio@xxxxxxxxxxxxxxx +S: Supported +W: https://ez.analog.com/linux-software-drivers +F: Documentation/devicetree/bindings/iio/dac/adi,ad8460.yaml + ANALOG DEVICES INC AD9739a DRIVER M: Nuno Sa <nuno.sa@xxxxxxxxxx> M: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx> -- 2.34.1
