On Tue, Sep 03, 2024 at 11:36:26AM GMT, Bartosz Golaszewski wrote:
> From: Konrad Dybcio <konradybcio@xxxxxxxxxx>
>
> Add nodes for the WCN6855 PMU, the WLAN module and relevant regulators
> and pin functions to fully describe how the wifi is actually wired on
> this platform.
>
> Signed-off-by: Konrad Dybcio <konradybcio@xxxxxxxxxx>
> [Bartosz:
> - write the commit message,
> - rebase Konrad's commit,
> - fix one of the supplies' name]
> Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/sc8280xp-crd.dts | 109 ++++++++++++++++++++++
> 1 file changed, 109 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> index 6020582b0a59..ec6bed8395b1 100644
> --- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> +++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
> @@ -260,6 +271,67 @@ usb1_sbu_mux: endpoint {
> };
> };
> };
> +
> + wcn6855-pmu {
> + compatible = "qcom,wcn6855-pmu";
> +
> + pinctrl-0 = <&wlan_en>;
> + pinctrl-names = "default";
> +
> + wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>;
> + bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
Nit: bt-enable-gpios should probably go to the next patch too.
With that fixed:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
> +
> + vddio-supply = <&vreg_s10b>;
> + vddaon-supply = <&vreg_s12b>;
> + vddpmu-supply = <&vreg_s12b>;
> + vddrfa0p95-supply = <&vreg_s12b>;
> + vddrfa1p3-supply = <&vreg_s11b>;
> + vddrfa1p9-supply = <&vreg_s1c>;
> + vddpcie1p3-supply = <&vreg_s11b>;
> + vddpcie1p9-supply = <&vreg_s1c>;
> +
--
With best wishes
Dmitry
