Hi , >I'm getting this: > > arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts:111.20-120.11: ERROR (phandle_references): /soc@0/bus@30800000/spba->bus@30800000/spi@30830000/can@0: Reference to non-existent node or label "pinctrl_canbus" I’m really sorry for making such a dumb mistake. I'll double-check everything, run tests, and send a corrected patch. Thank you for your understanding. Best regards, Tarang ________________________________________ From: Shawn Guo <shawnguo2@xxxxxxxx> Sent: Tuesday, September 3, 2024 12:16 PM To: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx> Cc: shawnguo@xxxxxxxxxx <shawnguo@xxxxxxxxxx>; krzk+dt@xxxxxxxxxx <krzk+dt@xxxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Conor Dooley <conor+dt@xxxxxxxxxx>; Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>; Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>; Fabio Estevam <festevam@xxxxxxxxx>; devicetree@xxxxxxxxxxxxxxx <devicetree@xxxxxxxxxxxxxxx>; imx@xxxxxxxxxxxxxxx <imx@xxxxxxxxxxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx <linux-arm-kernel@xxxxxxxxxxxxxxxxxxx>; linux-kernel@xxxxxxxxxxxxxxx <linux-kernel@xxxxxxxxxxxxxxx> Subject: Re: [PATCH v4] arm64: dts: imx8mm-emtop-baseboard: Add Peripherals Support CAUTION: This email originated from outside the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe. On Mon, Sep 02, 2024 at 11:14:55AM +0530, Tarang Raval wrote: > Add following peripherals support for the Emtop i.MX8M Mini Baseboard > > * Wi-Fi > * Audio > * SD card > * RTC > * CAN bus > * USB OTG > > Signed-off-by: Tarang Raval <tarang.raval@xxxxxxxxxxxxxxxxx> I'm getting this: arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts:111.20-120.11: ERROR (phandle_references): /soc@0/bus@30800000/spba-bus@30800000/spi@30830000/can@0: Reference to non-existent node or label "pinctrl_canbus" Shawn
