This patch adds the device tree bindings for ktd2692 flash LEDs.
Add optional properties 'flash-timeout-us' to control flash timeout
and 'vin-supply' for flash-led regulator
Signed-off-by: Ingi Kim <ingi2.kim@xxxxxxxxxxx>
---
.../devicetree/bindings/leds/leds-ktd2692.txt | 37 ++++++++++++++++++++++
1 file changed, 37 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/leds-ktd2692.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 0000000..1b44225
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,37 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie/Flash mode current, Flash timeout,
+LVP(low voltage protection).
+
+Required properties:
+ - compatible: "kinetic,ktd2692"
+ - ctrl-gpio : gpio pin in order control ktd2692 flash led.
+ There is an internal 300kOhm pull-down resistor at this pin
+ - supply : "vin" LED supply
+
+Optional property:
+ - flash-timeout-us : Maximum flash timeout in microseconds.
+ flash timeout ranges from 0 to 1835000us and
+ default is 1049000us.
+
+Example:
+
+vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat-supply";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <>;
+ regulator-always-on;
+};
+
+flash-led {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpio = <&gpc0 1 0>;
+ flash-timeout-us = <1835000>;
+ vin-supply = <&vbat>;
+};
--
2.0.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
