Depends on this: https://lore.kernel.org/linux-iio/20240823172017.9028-1-vassilisamir@xxxxxxxxx Changes in v5: [PATCH v5 1/7]: - Use local variable instead of direct assignment to improve readability [PATCH v5 2/7]: - Use local variable instead of direct assignment to improve readability [PATCH v5 4/7]: - Improve commit message - Use unit suffix in time variables - Use local variable instead of direct assignment to improve readability - Use 8 elements per line in the const int array [PATCH v5 5/7]: - Use not in the allOf:int: to reduce if cases - Use type:boolean [PATCH v5 6/7]: - Use local variable instead of direct assignment to improve readability - Use irq_get_trigger_type() - Make return paths consistent [PATCH v5 7/7]: - Use local variable instead of direct assignment to improve readbility --- v4: https://lore.kernel.org/linux-iio/20240828205128.92145-1-vassilisamir@xxxxxxxxx v3: https://lore.kernel.org/linux-iio/20240823181714.64545-1-vassilisamir@xxxxxxxxx v2: https://lore.kernel.org/linux-iio/20240725231039.614536-1-vassilisamir@xxxxxxxxx v1: https://lore.kernel.org/linux-iio/20240711211558.106327-1-vassilisamir@xxxxxxxxx Vasileios Amoiridis (7): iio: pressure: bmp280: Use bulk read for humidity calibration data iio: pressure: bmp280: Add support for bmp280 soft reset iio: pressure: bmp280: Remove config error check for IIR filter updates iio: pressure: bmp280: Use sleep and forced mode for oneshot captures dt-bindings: iio: pressure: bmp085: Add interrupts for BMP3xx and BMP5xx devices iio: pressure: bmp280: Add data ready trigger support iio: pressure: bmp280: Move bmp085 interrupt to new configuration .../bindings/iio/pressure/bmp085.yaml | 22 +- drivers/iio/pressure/bmp280-core.c | 682 +++++++++++++++--- drivers/iio/pressure/bmp280-i2c.c | 4 +- drivers/iio/pressure/bmp280-spi.c | 4 +- drivers/iio/pressure/bmp280.h | 52 ++ 5 files changed, 675 insertions(+), 89 deletions(-) base-commit: 0f718e10da81446df0909c9939dff2b77e3b4e95 prerequisite-patch-id: e4f81f31f4fbb2aa872c0c74ed4511893eee0c9a -- 2.25.1
