On 02/08/2024 09:09, Chen-Yu Tsai wrote:
The clocks for dp_intf* device nodes are given in the wrong order,
causing the binding validation to fail.
Fixes: 6c2503b5856a ("arm64: dts: mt8195: Add dp-intf nodes")
Signed-off-by: Chen-Yu Tsai <wenst@xxxxxxxxxxxx>
Applied, thanks!
---
arch/arm64/boot/dts/mediatek/mt8195.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 989e8ac545ac..e89ba384c4aa 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -3252,10 +3252,10 @@ dp_intf0: dp-intf@1c015000 {
compatible = "mediatek,mt8195-dp-intf";
reg = <0 0x1c015000 0 0x1000>;
interrupts = <GIC_SPI 657 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&vdosys0 CLK_VDO0_DP_INTF0>,
- <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+ clocks = <&vdosys0 CLK_VDO0_DP_INTF0_DP_INTF>,
+ <&vdosys0 CLK_VDO0_DP_INTF0>,
<&apmixedsys CLK_APMIXED_TVDPLL1>;
- clock-names = "engine", "pixel", "pll";
+ clock-names = "pixel", "engine", "pll";
status = "disabled";
};
@@ -3522,10 +3522,10 @@ dp_intf1: dp-intf@1c113000 {
reg = <0 0x1c113000 0 0x1000>;
interrupts = <GIC_SPI 513 IRQ_TYPE_LEVEL_HIGH 0>;
power-domains = <&spm MT8195_POWER_DOMAIN_VDOSYS1>;
- clocks = <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
- <&vdosys1 CLK_VDO1_DPINTF>,
+ clocks = <&vdosys1 CLK_VDO1_DPINTF>,
+ <&vdosys1 CLK_VDO1_DP_INTF0_MM>,
<&apmixedsys CLK_APMIXED_TVDPLL2>;
- clock-names = "engine", "pixel", "pll";
+ clock-names = "pixel", "engine", "pll";
status = "disabled";
};
