[PATCH v2 4/8] iio: adc: ad7606: wrap channel ranges & scales into struct

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



With the addition of AD7606C-16,18 which have differential & bipolar
channels (and ranges), which can vary from channel to channel, we'll need
to keep more information about each channel range.

To do that, we'll add a 'struct ad7606_chan_scale' type to hold just
configuration for each channel.
This includes the scales per channel (which can be different with
AD7606C-16,18), as well as the range for each channel.
This driver was already keeping the range value for each channel before,
and since this is couple with the scales, it also makes sense to put them
in the same struct.

Signed-off-by: Alexandru Ardelean <aardelean@xxxxxxxxxxxx>
---
 drivers/iio/adc/ad7606.c | 37 +++++++++++++++++++++++++------------
 drivers/iio/adc/ad7606.h | 22 ++++++++++++++++------
 2 files changed, 41 insertions(+), 18 deletions(-)

diff --git a/drivers/iio/adc/ad7606.c b/drivers/iio/adc/ad7606.c
index b400c9b2519d..2554a4a4a9c0 100644
--- a/drivers/iio/adc/ad7606.c
+++ b/drivers/iio/adc/ad7606.c
@@ -170,6 +170,7 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 {
 	int ret, ch = 0;
 	struct ad7606_state *st = iio_priv(indio_dev);
+	struct ad7606_chan_scale *cs;
 
 	switch (m) {
 	case IIO_CHAN_INFO_RAW:
@@ -183,8 +184,9 @@ static int ad7606_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_SCALE:
 		if (st->sw_mode_en)
 			ch = chan->address;
+		cs = &st->chan_scales[ch];
 		*val = 0;
-		*val2 = st->scale_avail[st->range[ch]];
+		*val2 = cs->scale_avail[cs->range];
 		return IIO_VAL_INT_PLUS_MICRO;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		*val = st->oversampling;
@@ -214,8 +216,9 @@ static ssize_t in_voltage_scale_available_show(struct device *dev,
 {
 	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
 	struct ad7606_state *st = iio_priv(indio_dev);
+	struct ad7606_chan_scale *cs = &st->chan_scales[0];
 
-	return ad7606_show_avail(buf, st->scale_avail, st->num_scales, true);
+	return ad7606_show_avail(buf, cs->scale_avail, cs->num_scales, true);
 }
 
 static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0);
@@ -253,19 +256,21 @@ static int ad7606_write_raw(struct iio_dev *indio_dev,
 			    long mask)
 {
 	struct ad7606_state *st = iio_priv(indio_dev);
+	struct ad7606_chan_scale *cs;
 	int i, ret, ch = 0;
 
 	guard(mutex)(&st->lock);
 
 	switch (mask) {
 	case IIO_CHAN_INFO_SCALE:
-		i = find_closest(val2, st->scale_avail, st->num_scales);
 		if (st->sw_mode_en)
 			ch = chan->address;
+		cs = &st->chan_scales[ch];
+		i = find_closest(val2, cs->scale_avail, cs->num_scales);
 		ret = st->write_scale(indio_dev, ch, i);
 		if (ret < 0)
 			return ret;
-		st->range[ch] = i;
+		cs->range = i;
 
 		return 0;
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
@@ -547,7 +552,9 @@ static const struct iio_trigger_ops ad7606_trigger_ops = {
 
 static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
 {
+	unsigned int num_channels = indio_dev->num_channels - 1;
 	struct ad7606_state *st = iio_priv(indio_dev);
+	int ch;
 
 	if (!st->bops->sw_mode_config)
 		return 0;
@@ -559,11 +566,14 @@ static int ad7606_sw_mode_setup(struct iio_dev *indio_dev)
 	indio_dev->info = &ad7606_info_os_range_and_debug;
 
 	/* Scale of 0.076293 is only available in sw mode */
-	st->scale_avail = ad7616_sw_scale_avail;
-	st->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
-
 	/* After reset, in software mode, ±10 V is set by default */
-	memset32(st->range, 2, ARRAY_SIZE(st->range));
+	for (ch = 0; ch < num_channels; ch++) {
+		struct ad7606_chan_scale *cs = &st->chan_scales[ch];
+
+		cs->scale_avail = ad7616_sw_scale_avail;
+		cs->num_scales = ARRAY_SIZE(ad7616_sw_scale_avail);
+		cs->range = 2;
+	}
 
 	return st->bops->sw_mode_config(indio_dev);
 }
@@ -572,6 +582,7 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 		 const char *name, unsigned int id,
 		 const struct ad7606_bus_ops *bops)
 {
+	struct ad7606_chan_scale *cs;
 	struct ad7606_state *st;
 	int ret;
 	struct iio_dev *indio_dev;
@@ -588,10 +599,12 @@ int ad7606_probe(struct device *dev, int irq, void __iomem *base_address,
 	st->bops = bops;
 	st->base_address = base_address;
 	/* tied to logic low, analog input range is +/- 5V */
-	st->range[0] = 0;
 	st->oversampling = 1;
-	st->scale_avail = ad7606_scale_avail;
-	st->num_scales = ARRAY_SIZE(ad7606_scale_avail);
+
+	cs = &st->chan_scales[0];
+	cs->range = 0;
+	cs->scale_avail = ad7606_scale_avail;
+	cs->num_scales = ARRAY_SIZE(ad7606_scale_avail);
 
 	ret = devm_regulator_get_enable(dev, "avcc");
 	if (ret)
@@ -698,7 +711,7 @@ static int ad7606_resume(struct device *dev)
 	struct ad7606_state *st = iio_priv(indio_dev);
 
 	if (st->gpio_standby) {
-		gpiod_set_value(st->gpio_range, st->range[0]);
+		gpiod_set_value(st->gpio_range, st->chan_scales[0].range);
 		gpiod_set_value(st->gpio_standby, 1);
 		ad7606_reset(st);
 	}
diff --git a/drivers/iio/adc/ad7606.h b/drivers/iio/adc/ad7606.h
index 771121350f98..afe6a4030e0e 100644
--- a/drivers/iio/adc/ad7606.h
+++ b/drivers/iio/adc/ad7606.h
@@ -8,6 +8,8 @@
 #ifndef IIO_ADC_AD7606_H_
 #define IIO_ADC_AD7606_H_
 
+#define AD760X_MAX_CHANNELS	16
+
 #define AD760X_CHANNEL(num, mask_sep, mask_type, mask_all, bits) {	\
 		.type = IIO_VOLTAGE,				\
 		.indexed = 1,					\
@@ -60,17 +62,27 @@ struct ad7606_chip_info {
 	unsigned long			init_delay_ms;
 };
 
+/**
+ * struct ad7606_chan_scale - channel scale configuration
+ * @scale_avail		pointer to the array which stores the available scales
+ * @num_scales		number of elements stored in the scale_avail array
+ * @range		voltage range selection, selects which scale to apply
+ */
+struct ad7606_chan_scale {
+	const unsigned int		*scale_avail;
+	unsigned int			num_scales;
+	unsigned int			range;
+};
+
 /**
  * struct ad7606_state - driver instance specific data
  * @dev		pointer to kernel device
  * @chip_info		entry in the table of chips that describes this device
  * @bops		bus operations (SPI or parallel)
- * @range		voltage range selection, selects which scale to apply
+ * @chan_scales		scale configuration for channels
  * @oversampling	oversampling selection
  * @base_address	address from where to read data in parallel operation
  * @sw_mode_en		software mode enabled
- * @scale_avail		pointer to the array which stores the available scales
- * @num_scales		number of elements stored in the scale_avail array
  * @oversampling_avail	pointer to the array which stores the available
  *			oversampling ratios.
  * @num_os_ratios	number of elements stored in oversampling_avail array
@@ -94,12 +106,10 @@ struct ad7606_state {
 	struct device			*dev;
 	const struct ad7606_chip_info	*chip_info;
 	const struct ad7606_bus_ops	*bops;
-	unsigned int			range[16];
+	struct ad7606_chan_scale	chan_scales[AD760X_MAX_CHANNELS];
 	unsigned int			oversampling;
 	void __iomem			*base_address;
 	bool				sw_mode_en;
-	const unsigned int		*scale_avail;
-	unsigned int			num_scales;
 	const unsigned int		*oversampling_avail;
 	unsigned int			num_os_ratios;
 	int (*write_scale)(struct iio_dev *indio_dev, int ch, int val);
-- 
2.46.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux