[PATCH] arm64: dts: amlogic: c3: fix dtbcheck warning

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>

Fix warning when use W=1 to build dtb, as following error:

arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:65.7-76.4: Warning
(unit_address_vs_reg): /sram: node has a reg or ranges property,
but no unit name

arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(unit_address_vs_reg): /soc/bus@fe000000/pinctrl@4000: node has a
unit name, but no reg or ranges property

arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi:168.34-413.6: Warning
(simple_bus_reg): /soc/bus@fe000000/pinctrl@4000: missing or empty
reg/ranges property

arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts:205.9-245.4:
Warning (avoid_unnecessary_addr_size): /soc/bus@fe000000/spi@56000
/nand@0: unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property

Fixes: d4bd8f3023b6 ("arm64: dts: amlogic: add C3 AW419 board")
Fixes: 520b792e8317 ("arm64: dts: amlogic: add some device nodes for C3")
Reported-by: kernel test robot <lkp@xxxxxxxxx>
Closes: https://lore.kernel.org/r/202409010005.A7tSzgEn-lkp@xxxxxxxxx/
Signed-off-by: Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>
---
Fix some warning when use W=1 to make dtb_check.
---
 arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts |  2 --
 arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts |  2 --
 arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi            | 10 +++++-----
 3 files changed, 5 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
index b8d2037afc00..a6736ad2a648 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c302x-aw409.dts
@@ -208,8 +208,6 @@ nand@0 {
 		spi-max-frequency = <83000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		status = "disabled";
 
 		partitions {
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
index 4477a2659e27..45f8631f9feb 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3-c308l-aw419.dts
@@ -208,8 +208,6 @@ nand@0 {
 		spi-max-frequency = <83000000>;
 		spi-tx-bus-width = <4>;
 		spi-rx-bus-width = <4>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		status = "disabled";
 
 		partitions {
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index c0ce776ec463..d0cda759c25d 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -62,7 +62,7 @@ pwrc: power-controller {
 		};
 	};
 
-	sram {
+	sram@7f50e00 {
 		compatible = "mmio-sram";
 		reg = <0x0 0x07f50e00 0x0 0x100>;
 		#address-cells = <1>;
@@ -169,11 +169,11 @@ periphs_pinctrl: pinctrl@4000 {
 				compatible = "amlogic,c3-periphs-pinctrl";
 				#address-cells = <2>;
 				#size-cells = <2>;
-				ranges;
+				ranges = <0x0 0x0 0x0 0x4000 0x0 0x02de>;
 
-				gpio: bank@4000 {
-					reg = <0x0 0x4000 0x0 0x004c>,
-					      <0x0 0x4100 0x0 0x01de>;
+				gpio: bank@0 {
+					reg = <0x0 0x0 0x0 0x004c>,
+					      <0x0 0x100 0x0 0x01de>;
 					reg-names = "mux", "gpio";
 					gpio-controller;
 					#gpio-cells = <2>;

---
base-commit: 1565ad6d5afc023cc4cc721513c9be28b902dee8
change-id: 20240902-fix_warning-6c8f362fc833

Best regards,
-- 
Xianwei Zhao <xianwei.zhao@xxxxxxxxxxx>






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux