* Lad Prabhakar <prabhakar.csengg@xxxxxxxxx> [150312 16:38]: > From: "Lad, Prabhakar" <prabhakar.csengg@xxxxxxxxx> > > this patch does the following: > 1: adds DT node for fixed oscillator. > 2: adds DT node entries for ov2659 sensor > 3: adds remote-endpoint entry for VPFE. > > Signed-off-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx> Applying into omap-for-v4.1/dt thanks. Tony > --- > Note this patch depends on > https://patchwork.kernel.org/patch/6000161/ > > arch/arm/boot/dts/am437x-gp-evm.dts | 42 +++++++++++++++++++++++++++++++++++-- > 1 file changed, 40 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts > index f84d971..195f452 100644 > --- a/arch/arm/boot/dts/am437x-gp-evm.dts > +++ b/arch/arm/boot/dts/am437x-gp-evm.dts > @@ -106,6 +106,14 @@ > }; > }; > }; > + > + /* fixed 12MHz oscillator */ > + refclk: oscillator { > + #clock-cells = <0>; > + compatible = "fixed-clock"; > + clock-frequency = <12000000>; > + }; > + > }; > > &am43xx_pinmux { > @@ -404,6 +412,21 @@ > regulator-always-on; > }; > }; > + > + ov2659@30 { > + compatible = "ovti,ov2659"; > + reg = <0x30>; > + > + clocks = <&refclk 0>; > + clock-names = "xvclk"; > + > + port { > + ov2659_0: endpoint { > + remote-endpoint = <&vpfe1_ep>; > + link-frequencies = /bits/ 64 <70000000>; > + }; > + }; > + }; > }; > > &i2c1 { > @@ -423,6 +446,21 @@ > touchscreen-size-x = <1024>; > touchscreen-size-y = <600>; > }; > + > + ov2659@30 { > + compatible = "ovti,ov2659"; > + reg = <0x30>; > + > + clocks = <&refclk 0>; > + clock-names = "xvclk"; > + > + port { > + ov2659_1: endpoint { > + remote-endpoint = <&vpfe0_ep>; > + link-frequencies = /bits/ 64 <70000000>; > + }; > + }; > + }; > }; > > &epwmss0 { > @@ -626,7 +664,7 @@ > > port { > vpfe0_ep: endpoint { > - /* remote-endpoint = <&sensor>; add once we have it */ > + remote-endpoint = <&ov2659_1>; > ti,am437x-vpfe-interface = <0>; > bus-width = <8>; > hsync-active = <0>; > @@ -643,7 +681,7 @@ > > port { > vpfe1_ep: endpoint { > - /* remote-endpoint = <&sensor>; add once we have it */ > + remote-endpoint = <&ov2659_0>; > ti,am437x-vpfe-interface = <0>; > bus-width = <8>; > hsync-active = <0>; > -- > 2.1.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html