Add support for loopback mode. Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> --- drivers/net/can/rockchip/rockchip_canfd-core.c | 7 ++++++- drivers/net/can/rockchip/rockchip_canfd-rx.c | 2 +- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/can/rockchip/rockchip_canfd-core.c b/drivers/net/can/rockchip/rockchip_canfd-core.c index 015623314e88..8853f6a135da 100644 --- a/drivers/net/can/rockchip/rockchip_canfd-core.c +++ b/drivers/net/can/rockchip/rockchip_canfd-core.c @@ -276,6 +276,11 @@ static void rkcanfd_chip_start(struct rkcanfd_priv *priv) RKCANFD_REG_MODE_RXSTX_MODE | RKCANFD_REG_MODE_WORK_MODE; + if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK) + priv->reg_mode_default |= RKCANFD_REG_MODE_LBACK_MODE | + RKCANFD_REG_MODE_SILENT_MODE | + RKCANFD_REG_MODE_SELF_TEST; + /* mask, i.e. ignore: * - TIMESTAMP_COUNTER_OVERFLOW_INT - timestamp counter overflow interrupt * - TX_ARBIT_FAIL_INT - TX arbitration fail interrupt @@ -894,7 +899,7 @@ static int rkcanfd_probe(struct platform_device *pdev) priv->can.clock.freq = clk_get_rate(priv->clks[0].clk); priv->can.bittiming_const = &rkcanfd_bittiming_const; priv->can.data_bittiming_const = &rkcanfd_data_bittiming_const; - priv->can.ctrlmode_supported = 0; + priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK; if (!(priv->devtype_data.quirks & RKCANFD_QUIRK_CANFD_BROKEN)) priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD; priv->can.do_set_mode = rkcanfd_set_mode; diff --git a/drivers/net/can/rockchip/rockchip_canfd-rx.c b/drivers/net/can/rockchip/rockchip_canfd-rx.c index d862116840eb..475c0409e215 100644 --- a/drivers/net/can/rockchip/rockchip_canfd-rx.c +++ b/drivers/net/can/rockchip/rockchip_canfd-rx.c @@ -243,7 +243,7 @@ static int rkcanfd_handle_rx_int_one(struct rkcanfd_priv *priv) err = rkcanfd_rxstx_filter(priv, cfd, header->ts, &tx_done); if (err) return err; - if (tx_done) + if (tx_done && !(priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)) return 0; } -- 2.45.2
