Re: [PATCH v4 2/2] PCI: xilinx-xdma: Add Xilinx QDMA Root Port driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Aug 11, 2024 at 07:53:45AM +0530, Thippeswamy Havalige wrote:
> Add support for Xilinx QDMA Soft IP core as Root Port.
> 
> The Versal Prime devices support QDMA soft IP module in programmable logic.
> 
> The integrated QDMA Soft IP block has integrated bridge function that can
> act as PCIe Root Port.
> 
> Signed-off-by: Thippeswamy Havalige <thippesw@xxxxxxx>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>

> ---
>  drivers/pci/controller/pcie-xilinx-dma-pl.c | 54 ++++++++++++++++++++-
>  1 file changed, 53 insertions(+), 1 deletion(-)
> ---
> changes in v4:
> - none
> 
> changes in v3:
> - Modify macro value to lower case.
> - Change return type based QDMA compatible.
> 
> changes in v2:
> - Add description for struct pl_dma_pcie
> ---
> diff --git a/drivers/pci/controller/pcie-xilinx-dma-pl.c b/drivers/pci/controller/pcie-xilinx-dma-pl.c
> index 5be5dfd8398f..1ea6a1d265bb 100644
> --- a/drivers/pci/controller/pcie-xilinx-dma-pl.c
> +++ b/drivers/pci/controller/pcie-xilinx-dma-pl.c
> @@ -13,6 +13,7 @@
>  #include <linux/msi.h>
>  #include <linux/of_address.h>
>  #include <linux/of_pci.h>
> +#include <linux/of_platform.h>

Looks like this header is not used.

- Mani

>  
>  #include "../pci.h"
>  #include "pcie-xilinx-common.h"
> @@ -71,10 +72,24 @@
>  
>  /* Phy Status/Control Register definitions */
>  #define XILINX_PCIE_DMA_REG_PSCR_LNKUP	BIT(11)
> +#define QDMA_BRIDGE_BASE_OFF		0xcd8
>  
>  /* Number of MSI IRQs */
>  #define XILINX_NUM_MSI_IRQS	64
>  
> +enum xilinx_pl_dma_version {
> +	XDMA,
> +	QDMA,
> +};
> +
> +/**
> + * struct xilinx_pl_dma_variant - PL DMA PCIe variant information
> + * @version: DMA version
> + */
> +struct xilinx_pl_dma_variant {
> +	enum xilinx_pl_dma_version version;
> +};
> +
>  struct xilinx_msi {
>  	struct irq_domain	*msi_domain;
>  	unsigned long		*bitmap;
> @@ -88,6 +103,7 @@ struct xilinx_msi {
>   * struct pl_dma_pcie - PCIe port information
>   * @dev: Device pointer
>   * @reg_base: IO Mapped Register Base
> + * @cfg_base: IO Mapped Configuration Base
>   * @irq: Interrupt number
>   * @cfg: Holds mappings of config space window
>   * @phys_reg_base: Physical address of reg base
> @@ -97,10 +113,12 @@ struct xilinx_msi {
>   * @msi: MSI information
>   * @intx_irq: INTx error interrupt number
>   * @lock: Lock protecting shared register access
> + * @variant: PL DMA PCIe version check pointer
>   */
>  struct pl_dma_pcie {
>  	struct device			*dev;
>  	void __iomem			*reg_base;
> +	void __iomem			*cfg_base;
>  	int				irq;
>  	struct pci_config_window	*cfg;
>  	phys_addr_t			phys_reg_base;
> @@ -110,16 +128,23 @@ struct pl_dma_pcie {
>  	struct xilinx_msi		msi;
>  	int				intx_irq;
>  	raw_spinlock_t			lock;
> +	const struct xilinx_pl_dma_variant   *variant;
>  };
>  
>  static inline u32 pcie_read(struct pl_dma_pcie *port, u32 reg)
>  {
> +	if (port->variant->version == QDMA)
> +		return readl(port->reg_base + reg + QDMA_BRIDGE_BASE_OFF);
> +
>  	return readl(port->reg_base + reg);
>  }
>  
>  static inline void pcie_write(struct pl_dma_pcie *port, u32 val, u32 reg)
>  {
> -	writel(val, port->reg_base + reg);
> +	if (port->variant->version == QDMA)
> +		writel(val, port->reg_base + reg + QDMA_BRIDGE_BASE_OFF);
> +	else
> +		writel(val, port->reg_base + reg);
>  }
>  
>  static inline bool xilinx_pl_dma_pcie_link_up(struct pl_dma_pcie *port)
> @@ -173,6 +198,9 @@ static void __iomem *xilinx_pl_dma_pcie_map_bus(struct pci_bus *bus,
>  	if (!xilinx_pl_dma_pcie_valid_device(bus, devfn))
>  		return NULL;
>  
> +	if (port->variant->version == QDMA)
> +		return port->cfg_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
> +
>  	return port->reg_base + PCIE_ECAM_OFFSET(bus->number, devfn, where);
>  }
>  
> @@ -731,6 +759,15 @@ static int xilinx_pl_dma_pcie_parse_dt(struct pl_dma_pcie *port,
>  
>  	port->reg_base = port->cfg->win;
>  
> +	if (port->variant->version == QDMA) {
> +		port->cfg_base = port->cfg->win;
> +		res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "breg");
> +		port->reg_base = devm_ioremap_resource(dev, res);
> +		if (IS_ERR(port->reg_base))
> +			return PTR_ERR(port->reg_base);
> +		port->phys_reg_base = res->start;
> +	}
> +
>  	err = xilinx_request_msi_irq(port);
>  	if (err) {
>  		pci_ecam_free(port->cfg);
> @@ -760,6 +797,8 @@ static int xilinx_pl_dma_pcie_probe(struct platform_device *pdev)
>  	if (!bus)
>  		return -ENODEV;
>  
> +	port->variant = of_device_get_match_data(dev);
> +
>  	err = xilinx_pl_dma_pcie_parse_dt(port, bus->res);
>  	if (err) {
>  		dev_err(dev, "Parsing DT failed\n");
> @@ -791,9 +830,22 @@ static int xilinx_pl_dma_pcie_probe(struct platform_device *pdev)
>  	return err;
>  }
>  
> +static const struct xilinx_pl_dma_variant xdma_host = {
> +	.version = XDMA,
> +};
> +
> +static const struct xilinx_pl_dma_variant qdma_host = {
> +	.version = QDMA,
> +};
> +
>  static const struct of_device_id xilinx_pl_dma_pcie_of_match[] = {
>  	{
>  		.compatible = "xlnx,xdma-host-3.00",
> +		.data = &xdma_host,
> +	},
> +	{
> +		.compatible = "xlnx,qdma-host-3.00",
> +		.data = &qdma_host,
>  	},
>  	{}
>  };
> -- 
> 2.34.1
> 
> 

-- 
மணிவண்ணன் சதாசிவம்




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux