Re: [PATCH v8 3/7] iommu/riscv: Add RISC-V IOMMU PCIe device driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 30/08/2024 4:37 pm, Tomasz Jeznach wrote:
On Fri, Aug 30, 2024 at 12:04 AM Jim Shu <jim.shu@xxxxxxxxxx> wrote:

Hi Tomasz,

QEMU RISC-V IOMMU will switch the PCIe vendor/device ID to Red Hat one
[1] in the latest v6 patch.
Will we also support the PCIe ID of Red Hat one in the Linux driver?


Absolutely yes. I've been holding of with adding Red Hat PID/VID to
limit number of changes outside iommu subsystem in this patch series,
planing to sent single change adding new PCI IDs once this series is
accepted.

It shouldn't entail any changes outside this code - per pci_ids.h, PCI_VENDOR_ID_REDHAT is already defined, while the individual IOMMU device IDs *should* stay local to this driver as the only user of them. Similarly, the Rivos vendor ID would only warrant factoring out once another driver turns up wanting to share it.

Thanks,
Robin.

Driver implementation is generic and should correctly
interact with QEMU model and other hardware implementations of RISC-V
IOMMU specification.

Best regards,
  - Tomasz

[1] https://patchew.org/QEMU/20240801154334.1009852-1-dbarboza@xxxxxxxxxxxxxxxx/20240801154334.1009852-5-dbarboza@xxxxxxxxxxxxxxxx/


Regards,
Jim Shu



On Sat, Jun 15, 2024 at 1:29 PM Tomasz Jeznach <tjeznach@xxxxxxxxxxxx> wrote:

Introduce device driver for PCIe implementation
of RISC-V IOMMU architected hardware.

IOMMU hardware and system support for MSI or MSI-X is
required by this implementation.

Vendor and device identifiers used in this patch
matches QEMU implementation of the RISC-V IOMMU PCIe
device, from Rivos VID (0x1efd) range allocated by the PCI-SIG.

MAINTAINERS | added iommu-pci.c already covered by matching pattern.

Link: https://lore.kernel.org/qemu-devel/20240307160319.675044-1-dbarboza@xxxxxxxxxxxxxxxx/
Co-developed-by: Nick Kossifidis <mick@xxxxxxxxxxxx>
Signed-off-by: Nick Kossifidis <mick@xxxxxxxxxxxx>
Reviewed-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
Signed-off-by: Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
---
  drivers/iommu/riscv/Kconfig     |   5 ++
  drivers/iommu/riscv/Makefile    |   1 +
  drivers/iommu/riscv/iommu-pci.c | 119 ++++++++++++++++++++++++++++++++
  3 files changed, 125 insertions(+)
  create mode 100644 drivers/iommu/riscv/iommu-pci.c

diff --git a/drivers/iommu/riscv/Kconfig b/drivers/iommu/riscv/Kconfig
index 5dcc5c45aa50..c071816f59a6 100644
--- a/drivers/iommu/riscv/Kconfig
+++ b/drivers/iommu/riscv/Kconfig
@@ -13,3 +13,8 @@ config RISCV_IOMMU

           Say Y here if your SoC includes an IOMMU device implementing
           the RISC-V IOMMU architecture.
+
+config RISCV_IOMMU_PCI
+       def_bool y if RISCV_IOMMU && PCI_MSI
+       help
+         Support for the PCIe implementation of RISC-V IOMMU architecture.
diff --git a/drivers/iommu/riscv/Makefile b/drivers/iommu/riscv/Makefile
index e4c189de58d3..f54c9ed17d41 100644
--- a/drivers/iommu/riscv/Makefile
+++ b/drivers/iommu/riscv/Makefile
@@ -1,2 +1,3 @@
  # SPDX-License-Identifier: GPL-2.0-only
  obj-$(CONFIG_RISCV_IOMMU) += iommu.o iommu-platform.o
+obj-$(CONFIG_RISCV_IOMMU_PCI) += iommu-pci.o
diff --git a/drivers/iommu/riscv/iommu-pci.c b/drivers/iommu/riscv/iommu-pci.c
new file mode 100644
index 000000000000..e675acceb290
--- /dev/null
+++ b/drivers/iommu/riscv/iommu-pci.c
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright © 2022-2024 Rivos Inc.
+ * Copyright © 2023 FORTH-ICS/CARV
+ *
+ * RISCV IOMMU as a PCIe device
+ *
+ * Authors
+ *     Tomasz Jeznach <tjeznach@xxxxxxxxxxxx>
+ *     Nick Kossifidis <mick@xxxxxxxxxxxx>
+ */
+
+#include <linux/compiler.h>
+#include <linux/init.h>
+#include <linux/iommu.h>
+#include <linux/kernel.h>
+#include <linux/pci.h>
+
+#include "iommu-bits.h"
+#include "iommu.h"
+
+/* Rivos Inc. assigned PCI Vendor and Device IDs */
+#ifndef PCI_VENDOR_ID_RIVOS
+#define PCI_VENDOR_ID_RIVOS             0x1efd
+#endif
+
+#ifndef PCI_DEVICE_ID_RIVOS_IOMMU
+#define PCI_DEVICE_ID_RIVOS_IOMMU       0xedf1
+#endif
+
+static int riscv_iommu_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+       struct device *dev = &pdev->dev;
+       struct riscv_iommu_device *iommu;
+       int rc, vec;
+
+       rc = pcim_enable_device(pdev);
+       if (rc)
+               return rc;
+
+       if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM))
+               return -ENODEV;
+
+       if (pci_resource_len(pdev, 0) < RISCV_IOMMU_REG_SIZE)
+               return -ENODEV;
+
+       rc = pcim_iomap_regions(pdev, BIT(0), pci_name(pdev));
+       if (rc)
+               return dev_err_probe(dev, rc, "pcim_iomap_regions failed\n");
+
+       iommu = devm_kzalloc(dev, sizeof(*iommu), GFP_KERNEL);
+       if (!iommu)
+               return -ENOMEM;
+
+       iommu->dev = dev;
+       iommu->reg = pcim_iomap_table(pdev)[0];
+
+       pci_set_master(pdev);
+       dev_set_drvdata(dev, iommu);
+
+       /* Check device reported capabilities / features. */
+       iommu->caps = riscv_iommu_readq(iommu, RISCV_IOMMU_REG_CAPABILITIES);
+       iommu->fctl = riscv_iommu_readl(iommu, RISCV_IOMMU_REG_FCTL);
+
+       /* The PCI driver only uses MSIs, make sure the IOMMU supports this */
+       switch (FIELD_GET(RISCV_IOMMU_CAPABILITIES_IGS, iommu->caps)) {
+       case RISCV_IOMMU_CAPABILITIES_IGS_MSI:
+       case RISCV_IOMMU_CAPABILITIES_IGS_BOTH:
+               break;
+       default:
+               return dev_err_probe(dev, -ENODEV,
+                                    "unable to use message-signaled interrupts\n");
+       }
+
+       /* Allocate and assign IRQ vectors for the various events */
+       rc = pci_alloc_irq_vectors(pdev, 1, RISCV_IOMMU_INTR_COUNT,
+                                  PCI_IRQ_MSIX | PCI_IRQ_MSI);
+       if (rc <= 0)
+               return dev_err_probe(dev, -ENODEV,
+                                    "unable to allocate irq vectors\n");
+
+       iommu->irqs_count = rc;
+       for (vec = 0; vec < iommu->irqs_count; vec++)
+               iommu->irqs[vec] = msi_get_virq(dev, vec);
+
+       /* Enable message-signaled interrupts, fctl.WSI */
+       if (iommu->fctl & RISCV_IOMMU_FCTL_WSI) {
+               iommu->fctl ^= RISCV_IOMMU_FCTL_WSI;
+               riscv_iommu_writel(iommu, RISCV_IOMMU_REG_FCTL, iommu->fctl);
+       }
+
+       return riscv_iommu_init(iommu);
+}
+
+static void riscv_iommu_pci_remove(struct pci_dev *pdev)
+{
+       struct riscv_iommu_device *iommu = dev_get_drvdata(&pdev->dev);
+
+       riscv_iommu_remove(iommu);
+}
+
+static const struct pci_device_id riscv_iommu_pci_tbl[] = {
+       {PCI_VENDOR_ID_RIVOS, PCI_DEVICE_ID_RIVOS_IOMMU,
+        PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+       {0,}
+};
+
+static struct pci_driver riscv_iommu_pci_driver = {
+       .name = KBUILD_MODNAME,
+       .id_table = riscv_iommu_pci_tbl,
+       .probe = riscv_iommu_pci_probe,
+       .remove = riscv_iommu_pci_remove,
+       .driver = {
+               .suppress_bind_attrs = true,
+       },
+};
+
+builtin_pci_driver(riscv_iommu_pci_driver);
--
2.34.1


_______________________________________________
linux-riscv mailing list
linux-riscv@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-riscv




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux