Re: [PATCH] arm64: dts: ti: k3-am69-sk: Update OSPI partitions offsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 30-08-2024 14:52, Nishanth Menon wrote:
On 14:37-20240830, Beleswar Padhi wrote:
OSPI NOR flash was partitioned with a size of 1 MB for the initial
bootloader ("ospi.tiboot3"). On the AM69-SK board, boot failures were
sometimes observed when the initial bootloader size exceeded 512 KB. To
Why does the boot fail when > 512MB?


It is a limitation by BOOT ROM where it can not bring up the initial bootloader when its size exceeds 512 KB in the DFU boot mode.


address this, the initial bootloader image has been optimized to be
smaller than 512 KB.

Therefore, limit the first OSPI partition size to 512 KB and adjust the
remaining size across the subsequent partitions.
I am NOT a fan of redoing flash partition organization of platforms that
are already in production - all kinds of ecosystem messes happen as a
result. Alternatively - give the 512K to u-boot tispl partition and
leave all others as is - this will at least allow people's current env
to be retained.


This sounds good to me. I will let Prasanth comment over this.


Signed-off-by: Beleswar Padhi <b-padhi@xxxxxx>
---
  arch/arm64/boot/dts/ti/k3-am69-sk.dts | 18 +++++++++---------
  1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 1e36965a1403..641236918379 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -1241,27 +1241,27 @@ partitions {
partition@0 {
  				label = "ospi.tiboot3";
-				reg = <0x0 0x100000>;
+				reg = <0x0 0x80000>;
  			};
- partition@100000 {
+			partition@80000 {
  				label = "ospi.tispl";
-				reg = <0x100000 0x200000>;
+				reg = <0x80000 0x200000>;
  			};
- partition@300000 {
+			partition@280000 {
  				label = "ospi.u-boot";
-				reg = <0x300000 0x400000>;
+				reg = <0x280000 0x400000>;
  			};
- partition@700000 {
+			partition@680000 {
  				label = "ospi.env";
-				reg = <0x700000 0x40000>;
+				reg = <0x680000 0x40000>;
  			};
- partition@740000 {
+			partition@6c0000 {
  				label = "ospi.env.backup";
-				reg = <0x740000 0x40000>;
+				reg = <0x6c0000 0x40000>;
  			};
partition@800000 {
--
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux