On 8/30/2024 7:44 AM, Rob Herring wrote: > On Thu, Aug 29, 2024 at 2:02 PM Nikunj Kela <quic_nkela@xxxxxxxxxxx> wrote: >> >> On 8/29/2024 11:52 AM, Rob Herring wrote: >>> On Wed, Aug 28, 2024 at 01:37:20PM -0700, Nikunj Kela wrote: >>>> Add interrupt specifier for extended SPI interrupts. >>> What's an "extended SPI"? Is this a GIC spec thing? If so, what version? >> Extended SPI is an extended range of SPI interrupts supported by GIC. >> >> Excerpt below from >> Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml >> >> "The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI >> interrupts, 2 for interrupts in the Extended SPI range, 3 for the >> Extended PPI range. Other values are reserved for future use." >> >> "The 2nd cell contains the interrupt number for the interrupt type. SPI >> interrupts are in the range [0-987]. PPI interrupts are in the range >> [0-15]. Extented SPI interrupts are in the range [0-1023]. Extended PPI >> interrupts are in the range [0-127]." > Looks like you should add EPPI define too while you're here. > > Rob Sure Rob. I can add that. Generally, there is an ask for a usecase before we push anything that is used in DT. I won't have any usecase to show for EPPI.
