Hi,
On Aug 30, 2024 at 05:27:09 -0500, Nishanth Menon wrote:
> Rename the pin mux and gpio-hog node names to match up with binding
> rules. This fixes dtbs_check warnings:
> 'gpmc0-pins-default' does not match any of the regexes: '-pins(-[0-9]+)?$|-pin$', 'pinctrl-[0-9]+'
> 'gpio0-36' does not match '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$'
>
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> ---
> Cc: Roger Quadros <rogerq@xxxxxxxxxx>
>
> This is a trivial fix, so applying Fixes seemed over-board.
>
> arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
> index f08c0e272b53..f91589818e32 100644
> --- a/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
> +++ b/arch/arm64/boot/dts/ti/k3-am642-evm-nand.dtso
> @@ -12,7 +12,7 @@
> #include "k3-pinctrl.h"
>
> &main_pmx0 {
> - gpmc0_pins_default: gpmc0-pins-default {
> + gpmc0_pins_default: gpmc0-default-pins {
I mean, if you are anyway renaming,
s/gpmc0_pins_default/gpmc0_default_pins
> bootph-all;
> pinctrl-single,pins = <
> AM64X_IOPAD(0x0094, PIN_INPUT, 7) /* (T19) GPMC0_BE1n.GPIO0_36 */
> @@ -50,7 +50,7 @@ AM64X_IOPAD(0x00a4, PIN_OUTPUT, 0) /* (N17) GPMC0_DIR */
> };
>
> &main_gpio0 {
> - gpio0-36 {
> + gpmc0-hog {
> bootph-all;
> gpio-hog;
> gpios = <36 0>;
With the change,
Reviewed-by: Dhruva Gole <d-gole@xxxxxx>
--
Best regards,
Dhruva Gole
Texas Instruments Incorporated
