On 12:42-20240829, Aniket Limaye wrote:
> From: Jared McArthur <j-mcarthur@xxxxxx>
>
> Commit 0d0a0b441346 ("arm64: dts: ti: k3-j7200: fix main pinmux
> range") split the main_pmx0 into two nodes: main_pmx0 and main_pmx1
> due to a non-addressable region, but incorrectly represented the
> ranges. As a result, the memory map for the pinctrl is incorrect. Fix
> this by introducing the correct ranges.
>
> The ranges are taken from the J7200 TRM (Table 5-695. CTRL_MMR0
> Registers). Padconfig registers stretch from 0x11c000 to 0x11c168
> with non-addressable portions from 0x11c10c to 0x11c10f, 0x11x114 to
> 0x11c11b, and 0x11c128 to 0x11c163.
>
> Link: https://www.ti.com/lit/ug/spruiu1c/spruiu1c.pdf (TRM)
Use the canonical link that redirects to the latest document such as https://www.ti.com/lit/pdf/spruiu1
older versions of the TRM may not be retained in ti.com
> Fixes: 0d0a0b441346 ("arm64: dts: ti: k3-j7200: fix main pinmux range")
> Signed-off-by: Jared McArthur <j-mcarthur@xxxxxx>
> Signed-off-by: Aniket Limaye <a-limaye@xxxxxx>
> ---
> .../dts/ti/k3-j7200-common-proc-board.dts | 2 +-
> arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 22 +++++++++++++++++--
> 2 files changed, 21 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> index 6593c5da82c0..df39f2b1ff6b 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
> @@ -254,7 +254,7 @@ J721E_IOPAD(0x38, PIN_OUTPUT, 0) /* (Y21) MCAN3_TX */
> };
> };
>
> -&main_pmx1 {
> +&main_pmx2 {
> main_usbss0_pins_default: main-usbss0-default-pins {
> pinctrl-single,pins = <
> J721E_IOPAD(0x04, PIN_OUTPUT, 0) /* (T4) USB0_DRVVBUS */
How is this change correct if you are changing the base from 0x1c to
0x10 (previously it was pointing to 0x20, now to 0x14? what is the
correct offset of USB0_DRVBUS pin?)
Did you do an audit of all offsets of main_pmx2 and 3 and resultant
address split up (including overlays if applicable)?
Explain that in commit message / diffstat as appropriate
> diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> index 9386bf3ef9f6..41adfa64418d 100644
> --- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
[...]
--
Regards,
Nishanth Menon
Key (0xDDB5849D1736249D) / Fingerprint: F8A2 8693 54EB 8232 17A3 1A34 DDB5 849D 1736 249D
