Add SARADC node for the Successive Approximation Analog to Digital Converter used in Sophgo CV1800B SoC. This patch only adds the active domain controller. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx> --- arch/riscv/boot/dts/sophgo/cv18xx.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi index 891932ae470f..da1ac59e976f 100644 --- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi @@ -133,6 +133,28 @@ portd: gpio-controller@0 { }; }; + saradc: adc@30f0000 { + compatible = "sophgo,cv1800b-saradc"; + reg = <0x030f0000 0x1000>; + clocks = <&clk CLK_SARADC>; + interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + + channel@2 { + reg = <2>; + }; + }; + i2c0: i2c@4000000 { compatible = "snps,designware-i2c"; reg = <0x04000000 0x10000>; -- 2.46.0