Changes in v2: - comestic corrections in device tree binding - add pci-st.c into MAINTAINERS - remove st_pcie_ops structure to avoid another level of indirection - remove nasty busy-loop - remove useless test using virt_to_phys() - move disable io support into dw-pcie driver I don't change the st_pcie_abort_handler() function because abort handling is masked during boot. This patch-set introduces a STMicroelectronics PCIe controller. It's based on designware PCIe driver. Gabriel Fernandez (5): ARM: STi: Kconfig update for PCIe support PCI: st: Add Device Tree bindings for sti pcie PCI: st: Provide support for the sti PCIe controller PCI: designware: Add disable IO support MAINTAINERS: Add pci-st.c to ARCH/STI architecture .../devicetree/bindings/pci/designware-pcie.txt | 2 + Documentation/devicetree/bindings/pci/st-pcie.txt | 54 ++ MAINTAINERS | 1 + arch/arm/mach-sti/Kconfig | 2 + drivers/pci/host/Kconfig | 9 + drivers/pci/host/Makefile | 1 + drivers/pci/host/pci-st.c | 617 +++++++++++++++++++++ drivers/pci/host/pcie-designware.c | 24 +- drivers/pci/host/pcie-designware.h | 1 + 9 files changed, 709 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/pci/st-pcie.txt create mode 100644 drivers/pci/host/pci-st.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
