Re: [PATCH V2] arm64: dts: qcom: Add SD Card node for qcm6490-idp

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Aug 22, 2024 at 11:14:57AM GMT, Sachin Gupta wrote:
> Add SD Card node for Qualcomm qcm6490-idp Board.
> 
> Signed-off-by: Sachin Gupta <quic_sachgupt@xxxxxxxxxxx>

It doesn't look like this patch was tested, see below...

> ---
>  arch/arm64/boot/dts/qcom/qcm6490-idp.dts | 27 ++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> index a0668f767e4b..8cfbb42af6a3 100644
> --- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> +++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
> @@ -641,6 +641,21 @@
>  	status = "okay";
>  };
>  
> +&sdc2_clk {
> +	bias-disable;
> +	drive-strength = <16>;
> +};
> +
> +&sdc2_cmd {
> +	bias-pull-up;
> +	drive-strength = <10>;
> +};
> +
> +&sdc2_data {
> +	bias-pull-up;
> +	drive-strength = <10>;
> +};
> +
>  &sdhc_1 {
>  	non-removable;
>  	no-sd;
> @@ -652,6 +667,18 @@
>  	status = "okay";
>  };
>  
> +&sdhc_2 {
> +	status = "okay";
> +
> +	pinctrl-0 = <&sdc2_clk>, <&sdc2_cmd>, <&sdc2_data>, <&sd_cd>;
> +	pinctrl-1 = <&sdc2_clk_sleep>, <&sdc2_cmd_sleep>, <&sdc2_data_sleep>, <&sd_cd>;

Please point me to the sd_cd definition that is going to be used here?

> +
> +	vmmc-supply = <&vreg_l9c_2p96>;
> +	vqmmc-supply = <&vreg_l6c_2p96>;
> +
> +	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
> +};
> +
>  &tlmm {
>  	gpio-reserved-ranges = <32 2>, /* ADSP */
>  			       <48 4>; /* NFC */
> -- 
> 2.17.1
> 

-- 
With best wishes
Dmitry




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux