The NETCMIX block control consists of registers for configuration of
peripherals in the NETC domain, so enable the clock of NETCMIX to
support the configuration.
Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
Reviewed-by: Peng Fan <peng.fan@xxxxxxx>
---
V3 no changes
---
drivers/clk/imx/clk-imx95-blk-ctl.c | 30 +++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/clk/imx/clk-imx95-blk-ctl.c b/drivers/clk/imx/clk-imx95-blk-ctl.c
index 74f595f9e5e3..19a62da74be4 100644
--- a/drivers/clk/imx/clk-imx95-blk-ctl.c
+++ b/drivers/clk/imx/clk-imx95-blk-ctl.c
@@ -248,6 +248,35 @@ static const struct imx95_blk_ctl_dev_data dispmix_csr_dev_data = {
.clk_reg_offset = 0,
};
+static const struct imx95_blk_ctl_clk_dev_data netxmix_clk_dev_data[] = {
+ [IMX95_CLK_NETCMIX_ENETC0_RMII] = {
+ .name = "enetc0_rmii_sel",
+ .parent_names = (const char *[]){"ext_enetref", "enetref"},
+ .num_parents = 2,
+ .reg = 4,
+ .bit_idx = 5,
+ .bit_width = 1,
+ .type = CLK_MUX,
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+ [IMX95_CLK_NETCMIX_ENETC1_RMII] = {
+ .name = "enetc1_rmii_sel",
+ .parent_names = (const char *[]){"ext_enetref", "enetref"},
+ .num_parents = 2,
+ .reg = 4,
+ .bit_idx = 10,
+ .bit_width = 1,
+ .type = CLK_MUX,
+ .flags = CLK_SET_RATE_NO_REPARENT | CLK_SET_RATE_PARENT,
+ },
+};
+
+static const struct imx95_blk_ctl_dev_data netcmix_dev_data = {
+ .num_clks = ARRAY_SIZE(netxmix_clk_dev_data),
+ .clk_dev_data = netxmix_clk_dev_data,
+ .clk_reg_offset = 0,
+};
+
static int imx95_bc_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -419,6 +448,7 @@ static const struct of_device_id imx95_bc_of_match[] = {
{ .compatible = "nxp,imx95-lvds-csr", .data = &lvds_csr_dev_data },
{ .compatible = "nxp,imx95-display-csr", .data = &dispmix_csr_dev_data },
{ .compatible = "nxp,imx95-vpu-csr", .data = &vpublk_dev_data },
+ { .compatible = "nxp,imx95-netcmix-blk-ctrl", .data = &netcmix_dev_data},
{ /* Sentinel */ },
};
MODULE_DEVICE_TABLE(of, imx95_bc_of_match);
--
2.34.1
