Re: [PATCH 6/6] arm64: dts: qcom: add base QCS615 RIDE dts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





在 8/28/2024 5:11 PM, Krzysztof Kozlowski 写道:
On 28/08/2024 09:54, Lijuan Gao wrote:


在 8/28/2024 2:25 PM, Krzysztof Kozlowski 写道:
On Wed, Aug 28, 2024 at 10:02:16AM +0800, Lijuan Gao wrote:
Add initial support for Qualcomm QCS615 RIDE board and enable
the QCS615 RIDE board to shell with dcc console.

Signed-off-by: Lijuan Gao <quic_lijuang@xxxxxxxxxxx>
---
   arch/arm64/boot/dts/qcom/Makefile        |  1 +
   arch/arm64/boot/dts/qcom/qcs615-ride.dts | 15 +++++++++++++++
   2 files changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 197ab325c0b9..c5503f189847 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -110,6 +110,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
   dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
   dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcs615-ride.dtb
   dtb-$(CONFIG_ARCH_QCOM)	+= qcs6490-rb3gen2.dtb
   dtb-$(CONFIG_ARCH_QCOM)	+= qcs8550-aim300-aiot.dtb
   dtb-$(CONFIG_ARCH_QCOM)	+= qdu1000-idp.dtb
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
new file mode 100644
index 000000000000..31d32ad951b5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+/dts-v1/;
+
+#include "qcs615.dtsi"
+/ {
+	model = "Qualcomm Technologies, Inc. QCS615 Ride";
+	compatible = "qcom,qcs615-ride", "qcom,qcs615";
+
+	chosen {
+		bootargs = "console=hvc0";

Noooo, last time I agreed on this, you told me later it is different.

In the early stages, enabling HVC is to more easily verify clock and
PMIC related functions, as it’s difficult to debug without the console
log. After the clock and PMIC are ready, we will enable the UART console.

Working serial is supposed to be part of the early submission.

Okay, I will remove it in the next patch.
Best regards,
Krzysztof



--
Thx and BRs
Lijuan Gao




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux