Re: [PATCH v2 3/4] wifi: wilc1000: Fold chip_allow_sleep()/chip_wakeup() into wlan.c

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/27/24 10:14 AM, Alexis Lothoré wrote:
On 8/23/24 18:08, Marek Vasut wrote:
Neither chip_allow_sleep()/chip_wakeup() is used outside of wlan.c .
Make both functions static and remove both the exported symbol and
entries from wlan.h .

Make chip_allow_sleep() return error code in preparation for the
follow up patches.

Move acquire_bus() and release_bus() to avoid forward declaration
of chip_allow_sleep()/chip_wakeup().

Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: "David S. Miller" <davem@xxxxxxxxxxxxx>
Cc: Adham Abozaeid <adham.abozaeid@xxxxxxxxxxxxx>
Cc: Ajay Singh <ajay.kathat@xxxxxxxxxxxxx>
Cc: Alexis Lothoré <alexis.lothore@xxxxxxxxxxx>
Cc: Claudiu Beznea <claudiu.beznea@xxxxxxxxx>
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Eric Dumazet <edumazet@xxxxxxxxxx>
Cc: Jakub Kicinski <kuba@xxxxxxxxxx>
Cc: Kalle Valo <kvalo@xxxxxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Marek Vasut <marex@xxxxxxx>
Cc: Paolo Abeni <pabeni@xxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: linux-wireless@xxxxxxxxxxxxxxx
Cc: netdev@xxxxxxxxxxxxxxx
---
V2: New patch
---
  .../net/wireless/microchip/wilc1000/wlan.c    | 47 +++++++++----------
  .../net/wireless/microchip/wilc1000/wlan.h    |  2 -
  2 files changed, 23 insertions(+), 26 deletions(-)

diff --git a/drivers/net/wireless/microchip/wilc1000/wlan.c b/drivers/net/wireless/microchip/wilc1000/wlan.c
index 1aab2f2dc159f..5fbba6876bd07 100644
--- a/drivers/net/wireless/microchip/wilc1000/wlan.c
+++ b/drivers/net/wireless/microchip/wilc1000/wlan.c
@@ -12,20 +12,6 @@
#define WAKE_UP_TRIAL_RETRY 10000 -static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
-{
-	mutex_lock(&wilc->hif_cs);
-	if (acquire == WILC_BUS_ACQUIRE_AND_WAKEUP && wilc->power_save_mode)
-		chip_wakeup(wilc);
-}
-
-static inline void release_bus(struct wilc *wilc, enum bus_release release)
-{
-	if (release == WILC_BUS_RELEASE_ALLOW_SLEEP && wilc->power_save_mode)
-		chip_allow_sleep(wilc);
-	mutex_unlock(&wilc->hif_cs);
-}
-
  static void wilc_wlan_txq_remove(struct wilc *wilc, u8 q_num,
  				 struct txq_entry_t *tqe)
  {
@@ -555,7 +541,7 @@ static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc)
  	return rqe;
  }
-void chip_allow_sleep(struct wilc *wilc)
+static int chip_allow_sleep(struct wilc *wilc)
  {
  	u32 reg = 0;
  	const struct wilc_hif_func *hif_func = wilc->hif_func;
@@ -584,7 +570,7 @@ void chip_allow_sleep(struct wilc *wilc)
  	while (--trials) {
  		ret = hif_func->hif_read_reg(wilc, to_host_from_fw_reg, &reg);
  		if (ret)
-			return;
+			return ret;

Forwarding error codes sounds like a good idea, but neither this patch nor the
next one is reading the return value from any chip_allow_sleep[XXX] function, so
it does not bring much value.

I will add a follow up patch to this one which adds the error handling, since there is a lot of it to propagate the errors through. It will be in V3.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux