This change fixes following error:
nand-controller@8000c000: #size-cells:0:0: 0 was expected
When dt-schema is checked:
CROSS_COMPILE="arm-none-linux-gnueabihf-" ARCH=arm make -j4 dtbs_check W=1
Signed-off-by: Lukasz Majewski <lukma@xxxxxxx>
---
arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
index 4817fba2d938..9655403b7f90 100644
--- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
+++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
@@ -99,7 +99,7 @@ perfmon: perfmon@80006000 {
gpmi: nand-controller@8000c000 {
compatible = "fsl,imx28-gpmi-nand";
#address-cells = <1>;
- #size-cells = <1>;
+ #size-cells = <0>;
reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
reg-names = "gpmi-nand", "bch";
interrupts = <41>;
--
2.39.2
