The CMN PLL controller provides clocks to networking hardware blocks on Qualcomm IPQ9574 SoC. It receives input clock from the on-chip Wi-Fi, and produces output clocks at fixed rates. These output rates are predetermined, and are unrelated to the input clock rate. The output clocks are supplied to the Ethernet hardware such as PPE (packet process engine) and the externally connected switch or PHY device. Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Signed-off-by: Luo Jie <quic_luoj@xxxxxxxxxxx> --- .../bindings/clock/qcom,ipq9574-cmn-pll.yaml | 72 ++++++++++++++++++++++ include/dt-bindings/clock/qcom,ipq-cmn-pll.h | 15 +++++ 2 files changed, 87 insertions(+) diff --git a/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml new file mode 100644 index 000000000000..1d9aa5ea01eb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/qcom,ipq9574-cmn-pll.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,ipq9574-cmn-pll.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm CMN PLL Clock Controller on IPQ SoC + +maintainers: + - Bjorn Andersson <andersson@xxxxxxxxxx> + - Luo Jie <quic_luoj@xxxxxxxxxxx> + +description: + The CMN PLL clock controller expects a reference input clock. + This reference clock is from the on-board Wi-Fi. The CMN PLL + supplies a number of fixed rate output clocks to the Ethernet + devices including PPE (packet process engine) and the connected + switch or PHY device. The CMN (or common) PLL's only function + is to enable clocks to Ethernet hardware used with the IPQ SoC + and does not include any other function. + +properties: + compatible: + enum: + - qcom,ipq9574-cmn-pll + + reg: + maxItems: 1 + + clocks: + items: + - description: The reference clock. The supported clock rates include + 25000000, 31250000, 40000000, 48000000, 50000000 and 96000000 HZ. + - description: The AHB clock + - description: The SYS clock + description: + The reference clock is the source clock of CMN PLL, which is from the + Wi-Fi. The AHB and SYS clocks must be enabled to access CMN PLL + clock registers. + + clock-names: + items: + - const: ref + - const: ahb + - const: sys + + "#clock-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - clock-names + - "#clock-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,ipq9574-gcc.h> + + clock-controller@9b000 { + compatible = "qcom,ipq9574-cmn-pll"; + reg = <0x0009b000 0x800>; + clocks = <&cmn_pll_ref_clk>, + <&gcc GCC_CMN_12GPLL_AHB_CLK>, + <&gcc GCC_CMN_12GPLL_SYS_CLK>; + clock-names = "ref", "ahb", "sys"; + #clock-cells = <1>; + }; +... diff --git a/include/dt-bindings/clock/qcom,ipq-cmn-pll.h b/include/dt-bindings/clock/qcom,ipq-cmn-pll.h new file mode 100644 index 000000000000..64b228659389 --- /dev/null +++ b/include/dt-bindings/clock/qcom,ipq-cmn-pll.h @@ -0,0 +1,15 @@ +/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */ +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +#ifndef _DT_BINDINGS_CLK_QCOM_IPQ_CMN_PLL_H +#define _DT_BINDINGS_CLK_QCOM_IPQ_CMN_PLL_H + +/* The output clocks from CMN PLL of IPQ9574. */ +#define PPE_353MHZ_CLK 0 +#define ETH0_50MHZ_CLK 1 +#define ETH1_50MHZ_CLK 2 +#define ETH2_50MHZ_CLK 3 +#define ETH_25MHZ_CLK 4 +#endif -- 2.34.1
