The remoteproc firmware like of R5F and DSPs in the MAIN voltage domain
use timers. Therefore, change the status of the timer nodes to
"reserved" to avoid any clash. Usage is described as below:
+===================+=============+
| Remoteproc node | Timer Node |
+===================+=============+
| main_r5fss0_core0 | main_timer4 |
+-------------------+-------------+
| main_r5fss0_core1 | main_timer5 |
+-------------------+-------------+
| main_r5fss1_core0 | main_timer6 |
+-------------------+-------------+
| main_r5fss1_core1 | main_timer7 |
+-------------------+-------------+
| main_r5fss2_core0 | main_timer8 |
+-------------------+-------------+
| main_r5fss2_core1 | main_timer9 |
+-------------------+-------------+
| c71_0 | main_timer0 |
+-------------------+-------------+
| c71_1 | main_timer1 |
+-------------------+-------------+
| c71_2 | main_timer2 |
+-------------------+-------------+
| c71_3 | main_timer3 |
+-------------------+-------------+
Fixes: 833377cf858b ("arm64: dts: ti: k3-j784s4: Add general purpose timers")
Signed-off-by: Beleswar Padhi <b-padhi@xxxxxx>
---
arch/arm64/boot/dts/ti/k3-am69-sk.dts | 41 +++++++++++++++++++++++++++
1 file changed, 41 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index ad6570c51a68..1e36965a1403 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -987,6 +987,47 @@ &main_r5fss1 {
ti,cluster-mode = <0>;
};
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+ status = "reserved";
+};
+
+&main_timer1 {
+ status = "reserved";
+};
+
+&main_timer2 {
+ status = "reserved";
+};
+
+&main_timer3 {
+ status = "reserved";
+};
+
+&main_timer4 {
+ status = "reserved";
+};
+
+&main_timer5 {
+ status = "reserved";
+};
+
+&main_timer6 {
+ status = "reserved";
+};
+
+&main_timer7 {
+ status = "reserved";
+};
+
+&main_timer8 {
+ status = "reserved";
+};
+
+&main_timer9 {
+ status = "reserved";
+};
+
&main_r5fss2 {
ti,cluster-mode = <0>;
};
--
2.34.1
