Re: [PATCH v3 1/3] dt-bindings: serial: Add Loongson UART controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




在 2024/8/26 13:59, Krzysztof Kozlowski 写道:
On Mon, Aug 26, 2024 at 10:47:03AM +0800,zhenghaowei@xxxxxxxxxxx wrote:
From: Haowei Zheng<zhenghaowei@xxxxxxxxxxx>

Add Loongson UART controller binding with DT schema format using
json-schema.

Signed-off-by: Haowei Zheng<zhenghaowei@xxxxxxxxxxx>
---
  .../bindings/serial/loongson,uart.yaml        | 63 +++++++++++++++++++
  1 file changed, 63 insertions(+)
  create mode 100644 Documentation/devicetree/bindings/serial/loongson,uart.yaml

Changes in V2:

- Correct the schema formatting errors.

- file name changed from 'loongson-uart.yaml' to 'loongson,ls7a-uart.yaml'

- Replace 'loongson,loongson-uart' with 'loongson,ls7a-uart'.

Changes in V3:

- Change the filename from 'loongson,ls7a-uart.yaml' to 'loongson,uart.yaml'.

- Drop newly defined features: fractional-division, rts-invert, dtr-invert,
   cts-invert and dsr-invert.

- Add three specific SoC: 'loongson,ls7a-uart', 'loongson,ls3a5000-uart' and
   'loongson,ls2k2000-uart'.

- Drop 'LOONGSON UART DRIVER' description in MAINTAINERS.

diff --git a/Documentation/devicetree/bindings/serial/loongson,uart.yaml b/Documentation/devicetree/bindings/serial/loongson,uart.yaml
new file mode 100644
index 000000000000..19a65dd5be9f
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/loongson,uart.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id:http://devicetree.org/schemas/loongson,uart.yaml#
+$schema:http://devicetree.org/meta-schemas/core.yaml#
+
+title: Loongson UART
+
+maintainers:
+  - Haowei Zheng<zhenghaowei@xxxxxxxxxxx>
+
+allOf:
+  - $ref: serial.yaml
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - loongson,ls7a-uart
Quick look tells me there is no such soc like ls7a. If there is such,
please point me to the DTSI.

I had a problem with my description of ls7a, it's just a bridge chip, but

both ls2k0500 and ls2k1000 share the same UART controller as it.

+          - loongson,ls3a5000-uart
+          - loongson,ls2k2000-uart
+      - items:
+          - enum:
+              - loongson,ls2k1000-uart
+              - loongson,ls2k0500-uart
+          - const: loongson,ls7a-uart
Just use real SoC names.

The ls7a is not an SoC; it is typically used in conjunction with Loongson 3 series

processors and boots via ACPI. Currently, there is no corresponding DTSI provided.

+      - items:
+          - enum:
+              - loongson,ls2k1500-uart
+          - const: loongson,ls2k2000-uart
+      - items:
+          - enum:
+              - loongson,ls3a6000-uart
+          - const: loongson,ls3a5000-uart
Best regards,
Krzysztof





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux