Hi Biju,
On Thu, Aug 22, 2024 at 6:23 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> Enable DU and link with the HDMI add-on board connected with
> the parallel connector on RZ/G2UL SMARC EVK.
>
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> ---
> v3->v4:
> * Restored ports property in du node and port@0 for DPI interface.
Thanks for the update!
> --- a/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a07g043u11-smarc.dts
> @@ -35,4 +35,115 @@
> / {
> model = "Renesas SMARC EVK based on r9a07g043u11";
> compatible = "renesas,smarc-evk", "renesas,r9a07g043u11", "renesas,r9a07g043";
> +
> + hdmi-out {
> + compatible = "hdmi-connector";
[...]
> +&i2c1 {
> + adv7513: adv7513@39 {
> + compatible = "adi,adv7513";
The HDMI connector and ADV7513 bridge are not present on the SMARC
Carrier board, but on a separate board. Hence I think this should be
moved to a separate DT overlay .dtso, with a suitable Makefile rule
to build a DTS for SMARC Carrier + HDMI add-on board.
The actual DT description LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
