RE: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Claudiu,

> -----Original Message-----
> From: claudiu beznea <claudiu.beznea@xxxxxxxxx>
> Sent: Friday, August 23, 2024 9:41 AM
> Subject: Re: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S
> 
> Hi, Biju,
> 
> On 22.08.2024 19:59, Biju Das wrote:
> > Hi Claudiu,
> >
> >> -----Original Message-----
> >> From: Claudiu <claudiu.beznea@xxxxxxxxx>
> >> Sent: Thursday, August 22, 2024 4:28 PM
> >> Subject: [PATCH 08/16] reset: rzg2l-usbphy-ctrl: Add support for
> >> RZ/G3S
> >>
> >> From: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >>
> >> Add support for RZ/G3S SoC. It needs its own compatible as it uses 2
> >> reset signals and it cannot work w/o both of them. To be able to
> >> fully validate this on DT schema, too, the RZ/G3S uses it's own compatible w/o a fallback (as if
> the fallback will be used the RZ/G3S will not work anyway).
> >
> > Other than reset/ power domain approach for handling USBPWRRDY signal
> >
> > Can't USBPWRRDY signal handled in SYSC driver directly? Since SYSC
> > driver init happens at very early boot stage Check for USBPHY control device availability and handle
> USBPWRRDY signal there??
> 
> In theory, it can be done this way, too.  The downside I see at the moment with this approach would be
> that the USB, PCIe drivers will not be in charge with handling their signals, there will be no direct
> dependency available b/w SYSC and USB drivers.

SYSC driver probe/init will happen before USB driver because of early init calls.
So, I don't think there will be a problem.

Cheers,
Biju



> >>
> >> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
> >> ---
> >>  drivers/reset/reset-rzg2l-usbphy-ctrl.c | 1 +
> >>  1 file changed, 1 insertion(+)
> >>
> >> diff --git a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> >> b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> >> index 8b64c12f3bec..08b18d7de7ad 100644
> >> --- a/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> >> +++ b/drivers/reset/reset-rzg2l-usbphy-ctrl.c
> >> @@ -93,6 +93,7 @@ static int rzg2l_usbphy_ctrl_status(struct
> >> reset_controller_dev *rcdev,
> >>
> >>  static const struct of_device_id rzg2l_usbphy_ctrl_match_table[] = {
> >>  	{ .compatible = "renesas,rzg2l-usbphy-ctrl" },
> >> +	{ .compatible = "renesas,r9a08g045-usbphy-ctrl" },
> >>  	{ /* Sentinel */ }
> >>  };
> >>  MODULE_DEVICE_TABLE(of, rzg2l_usbphy_ctrl_match_table);
> >> --
> >> 2.39.2
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux